If you have any questions about items before purchasing, please contact us. We’ll be happy to help!

Please double check your shipping address. We are not responsible for addresses supplied incorrectly and shipping charges will be applied in the event a package needs to be redirected.

We only ship within the continental United States (not Alaska or Hawaii).

We offer 24 hours after a purchase for cancellation. Message us if this is the case, as we’d like to address any questions that may have arisen. We typically do not offer returns or exchanges.

If you are not happy after receiving your item, please contact us before leaving feedback to allow us a chance to make things right. We’re only happy when you’re happy!

The Bol family at Share With Others®️ is not affiliated with the Little Free Library nonprofit organization. We fully endorse them and wish them every success. After Todd Bol passed away very unexpectedly at the end of 2018, the nonprofit cut ties with us. No Bol family members are involved in any ongoing capacity with the nonprofit, even though our close ties predate it and continued right up until Todd’s passing. The Bol family started SWO at Todd’s request, while in hospice, to continue his legacy with his immediate and extended family engaged and to embrace the entire front yard sharing movement that Todd’s Johnny Appleseed-like enthusiasm sparked. To purchase an optional LFL plaque with number go to littlefreelibrary.org.

Your sharing library is made of wood, and raw wood needs to be painted or stained to protect it from water and sun damage. Standard exterior house paints are durable, inexpensive, readily available, and an all-around good option. We recommend applying a coat of primer before painting; the primer is designed to bond well with wood and will help your paint adhere better. Apply more than one coat of paint for extra weather protection, and reapply every 1 to 2 years, or as needed. If you love to see the wood grain, use outdoor transparent or outdoor semi-transparent stain — our favorite at SWO.

Use a 9/16” wrench to install the carriage bolts included with your pole topper purchase. Insert bolts into the pre-drilled guide holes on the inside floor of your SWO library and then screw them through the pre-drilled guide holes on the pole topper. Make sure to add the washer and nut at the bottom of the bolt before tightening. Tighten until the square edge of the bolt’s top is pulled into the library’s floor. Before completing the above, make sure the pole topper is already attached to a 4x4 weather treated post that’s been installed in the ground. All installation hardware provided.

You’ll need to purchase a 6 ft. – 4” x 4” weather treated post, which will need to be cut down to 4 ft for installation (usually a free service at your local supplier). Bury it 16” to 18” while leaving a length of about 30” from the base of the library to the ground, making it child friendly. There’s no need to use cement during the process. We recommend pouring a bag of pea gravel along the sides of the the post after its placed and then packing in the dirt tightly, allowing for drainage and the ability to remove the post at a later date. Place the pole topper on the post with pre-drilled guide holes facing backside. Use the three 2” screws provided to secure. Next, attach the library to the pole topper, as described in the section above.