WWCMO606XS Bicycle Size Leopard Design Sticker Set | 80 Pieces | Original Leopard Pattern | Mr. Sticker Customs

80-Pieces Leopard Design Sticker Set ⚠️ PLEASE READ THE INFORMATION BELOW BEFORE PURCHASING

1️⃣ NOT A SINGLE-PIECE WRAP
This sticker set is not a single-piece vinyl/sticker (not a wrap sticker). One set contains 80 separate pieces of leopard design stickers. Each sticker piece should be applied separately. If you're looking for a wrap-style application to fully cover an area, this set is not suitable.

2️⃣ SIZE & APPLICATION
• Each sticker piece is cut precisely by our printers and comes with transfer tape for easier application.
• One set (80 sticker pieces) comes on 5 separate sheets.
• The size of one sheet is about 12cm (4.3") wide and 14cm (5.5") long.
• You will need a scissors ✂️ to separate the sticker pieces.
• Application instructions can be found on the back of the package. Please read prior to application. For the best adhesion, we recommend removing the transfer tape after 24 hours.

♦ IMPORTANT: We recommend 3 or 4 sets for an adult bicycle frame (you may need more if you apply the pieces close to each other). Please read "APPLICATION SURFACES" part before applying your sticker.

3️⃣ MATERIAL OPTIONS
■ Standard Set: This set is printed on a white glossy vinyl. Good adhesive strength.

■ REFLECTIVE SET: This set is printed on a very light grey reflective vinyl. Reflective vinyl has a feature of reflecting light from certain angles (More information about how reflective sticker works can be found below). Because the base color of our reflective vinyl is very light grey, colors may appear slightly darker in daylight (may also look shiny brighter if reflecting light in daylight). Reflective set is eye-catching and may enhance visibility for night rides. Adhesive strength is slightly stronger than standard set.

■ STRONG ADHESIVE SET: This set looks identical to standard set but features 1.56x stronger adhesive. We recommend these sets for low-energy surfaces (e.g., ABS plastic). See "APPLICATION SURFACES" for more details about low and high-energy surfaces.

*This set is recommended for bicycle frame and bicycle helmet type of areas due to dimensions of the sticker pieces.

⭐️ SET OPTIONS:
• 2-Set Value Pack: 160 stickers (comes on 10 sheets)
• 3-Set Value Pack: 240 stickers (comes on 15 sheets)
• 4-Set Value Pack: 320 stickers (comes on 20 sheets)

For ensuring the best quality, leopard sets are produced after your purchase. Production may take 1 to 3 workdays. Because leopard sets are made to order items, unless there is a production related problem, returns are not accepted.


💯 QUALITY & DURABILITY
• We print our stickers with premium quality inks, over the best quality vinyls using the high-tech printers. Our stickers are resistant to water and sun light. Once applied to a suitable surface, rain, dust, mud, snow, even pressure wash won't take them off. ☀️⛈️☃️☄️🧼🪣

❌️ Our stickers are not suitable for high-friction areas (e.g., phone cases, areas exposed to constant hand/knee contact). Contact exposure may remove the ink(graphic) over time, due to friction.

❌️ Avoid contact with gasoline, thinner, or similar chemicals, as they may dissolve the ink.

• The colors on your sticker might be slightly different than what you see on your screen. This is due to saturation, RGB and contrast levels of screens which may change from brand to brand, and they may be different than the real colors.

◽️ ABOUT REFLECTIVE VINYL
Our reflective vinyl reflects light similar to a mirror reflects a light. But because of the special design of the vinyl, unlike a mirror, our reflective vinyl reflects light from wider angles.

• How to test:
1- Place the sticker on floor.
2- Turn on your phone’s flashlight and hold it at chest level.
3- Move your phone side to side and back and forth over 0the sticker – you’ll see it reflect light at certain angles.

♦ Important: The transfer tape may slightly reduce reflectivity. Once removed, the sticker will reflect light more effectively.
♦ Note: Reflective vinyl does not glow in the dark; it requires a light source to reflect.



◻️ APPLICATION SURFACES
Not all surfaces allow stickers to adhere well. Think of it like a magnet—it only sticks to certain materials.
Surfaces are divided into two types: high-energy and low-energy. Although you may find extended information about the high and low-energy surfaces on the internet, here are some examples:

✔️ High-energy surfaces (best adhesion): Painted metal (e.g., car hoods, metal doors), stainless steel, glass (smooth glass surfaces), smooth plastic (when it's coated or painted)

❌ Low-energy surfaces (weak adhesion): Bare plastic (e.g., ABS, PVC without paint or varnish), uncoated wood (raw wood without varnish), rubber (especially textured or unfinished), silicone, rough or uneven surfaces (e.g., textured concrete, unfinished metal), fabric (clothes, t-shirt etc.)

■ How to test your surface: Try sticking stationery tape or packing tape to it. If the tape sticks well, your surface is high-energy, and the sticker will adhere properly. If not, your surface is low-energy, and the strong adhesive set is recommended.



⚠️ Important Notice: Copying, distributing, or reproducing this content is strictly prohibited. All rights reserved. © 2025 Mr. Sticker Customs™️