Elegoo Mars Build Plate Drain Holder, Angled Resin Drip Accessory for Mars Printers

Angled drain holder for Elegoo Mars build plates designed to let resin drip cleanly back into the vat after printing. Compatible with Elegoo Mars, Mars Pro and Mars 3 resin 3D printers.

This compact 3D printed tool holds the build plate at an angle so resin drains faster and more completely, helping keep your workspace cleaner and making post-processing easier.

This angled holder for the build plate of Elegoo Mars series resin printers was designed to improve the resin draining process after printing.

Designed and tested for:

• Elegoo Mars
• Elegoo Mars Pro
• Elegoo Mars 3

FEATURES

• Original design created and tested by me.
I spent a lot of time optimizing the geometry to make the hanger compact, stable and efficient.

• Increased distance between the build plate and the vat.
This allows you to use the hanger even with larger printed models than the original holder allows.

• Angled build plate position.
The holder tilts the platform toward one corner, allowing resin to flow back into the vat more efficiently.

• Simple and reliable to use.
The hanger securely holds the build plate while resin drains after printing.

VIDEO DEMONSTRATION
You can watch a detailed presentation of this product here:
https://youtu.be/Iqi_tsbKxIY


STL FILE AVAILABLE !!!

If you prefer printing it yourself, I also sell the 3D model of this hanger in my Etsy shop:
https://www.etsy.com/listing/1262836994

If you buy the file, you can print it using resin or FDM filament in any color you like.

Please do not share or resell the 3D model. I spent a lot of time designing and testing this hanger, and I appreciate your respect for my work.

***
Please note, I only sell a 3D-printed Angled Hanger of my own design.
I do not include in the set to the Hanger, the original Build Plate from 3D printers Mars!


***
Important advice!
Right after printing, the build-plate can hold a large amount of resin, so please carefully take the plate off and tilt it for a few seconds to allow most of the resin to drain into the vat.
Then place the platform on the holder and leave for some time to allow the residual of the resin to drain out of the printed model and the platform.


***
This is my personal design and I 3D-print this item from PLA plastic.
Although the technology of FDM 3D printing does not allow obtaining a perfectly smooth and clean surface, so the surface may have some flaws (please see attached photos), but this does not affect the functionality of this part.

I make them to order, so you can request the number of items and the color you want.


***
This item has a sufficiently high strength for its intended use.
It is not recommended to deliberately apply excessive loads in order to avoid breaking the item.