Star Shaped Cutter- Polymer Cutter - 3D Printed Cutter - Jewelry making - Clay Cutters - Polymer Clay Cutters - Celestial bodies

Star Shaped Cutter- Polymer Cutter - 3D Printed Cutter - Jewelry making - Clay Cutters - Polymer Clay Cutters - Celestial bodies

These cutters are strong with a sharp cutting edge and are designed to work with polymer clay.

The cutters come in different sizes; Cutting height of our cutter is 12mm. The cutting wall is 1mm with beveled edge of 0.4mm, which provides sharp cutting edge while maintaining the durability of the cutter.

Sizes:
0.5 inches/ 13 mm
0.75 inches / 19 mm
1.00 inch/ 25 mm
1.25 inches/ 32 mm
1.50 inches/ 38 mm
1.75 inches/ 44 mm
2.00 inches/ 51 mm
2.25 inches/ 57 mm


Material:Printed in PLA, a biodegradable food safe and environmentally friendly plastic!

Use:Lay your sheet of clay flat on your work surface. Ceramic tiles make ideal work surfaces for polymer clay. To avoid clay getting trapped in small edges, place a piece of cling wrap (plastic wrap) between the clay. Alternatively, stroke your clay with corn flour before pressing the cutters into the clay. Else it might cause the clay to get trapped into the cutter. If that happens, remove the clay with a needle or a toothpick with care and wash with warm soapy water.

3D printed cutters do not give a clean cut and often require the edges of the pieces to be sanded after baking. To minimize the sanding, before baking use a clay tool or your fingers to gently press/remove the excess of clay. Gently stroke the edges of the piece to even it.

Care Instructions:HAND WASH ONLY. Not dishwasher safe. Keep away from prolonged exposure to sunlight, heat and humidity. Exposure to heat may warp the cutters. These cutters should be washed with cold or lukewarm water and cleaned with a small brush

Processing Time:Our processing time is 3-5 business days.

Please let us know if you have a critical timeline and we'll do our best to meet your needs.

If you have any questions or requests, feel free to contact us.