Our unique vanity tops are made from German oak planks. The panels are 4-4.5 cm thick. The natural tree edge and the characteristic filled knotholes and cracks make each slab unique and an eye-catcher in your bathroom.

Our differentiators...

We only use German oak planks to manufacture our vanity tops. The wood is seasoned for years (air drying) before processing and then kiln dried to achieve a high resistance to warping.
Our small vanity tops consist of just one unglued plank. For the larger vanity tops, a maximum of 2-3 planks are glued together. Before gluing, the planks are matched to one another in such a way that the natural look and beauty of the wood is preserved. It is always primarily the wood from a cut trunk that is processed in order to have the same wood grain, wood color and wane edge as possible.
The natural edge is brushed and lightly sanded so that it retains its natural character. The small cracks and knotholes are painstakingly filled with black colored resin. This prevents water etc. from penetrating the plate. The surface is then sanded flat and oiled so that you can use your solid wood panel immediately after delivery.

Our plates are 4-4.5 cm thick and are handmade regionally in Berlin & Brandenburg. (from choosing the planks to building the packaging)

If you do not specify a special request, the 2 side edges and the wall side are straight. The front or Visible edge has a natural tree edge. If the plate should only be 3.5 or 3 cm thick instead of 4-4.5 cm, please write a message after the purchase. (no extra charge) If your measurement is between two sizes, please choose the closest size and write a message with your desired size after purchase. (no extra charge) For a completely different size, please write a message and I will then set the size/special request as an option. If you would like a cut-out or drill hole, please order the "drill/cut-out" option for your panel and send a message with a sketch/the dimensions for the drill holes or cut-outs after purchase. The depth of the panel is determined by the straight edges (wall side ) measured to the lower edge of the tree edge. Due to the natural edge, a deviation of 5 cm in depth is to be expected. This means that if you buy a slab measuring 60 x 40 cm, for example, the depth will actually be between 40 and 45 cm. If this "span" is too big for you please write a message. We then manufacture the plate according to its "span".

Our recommendation for optimal care

The vanity top is already oiled with a special combination of hard wax and oil and is intended for immediate use. In order to continue to maintain the high resistance to dirt, moisture and temperature fluctuations, the plate should be re-oiled about twice a year. Simply apply a commercially available hard wax oil/hard oil from e.g. Clou, Osmo, RMC to the plate with a cotton cloth and massage in. After half an hour, remove excess oil with a dry cloth.

The offer is exclusively for the solid wood vanity top. Any decorative items are not part of the auction.