🌸 These are handmade to order - please see the estimated timeline below for current processing times.
Get the 5", 7" and 9" hexagon molds as a discounted set!
All our large casting molds feature built-in acrylic support panels. This keeps the mold walls from curving inwards as the resin cures so you have nice straight sides on your casts!
SMALL 5" HEXAGON
Dimensions of Finished Casting:
• 5" tall, 5.75" wide point to point, and 3" deep (12.7cm tall, 14.6cm wide, 7.6cm deep).
• Requires approximately 1000ml/34 fl oz of resin
MEDIUM 7" HEXAGON
Dimensions of Finished Casting:
• 7" tall, 8" wide point to point, and 3" deep (17.8cm tall, 20.3cm wide, 7.6cm deep).
• Requires approximately 2100ml/71 fl oz of resin.
LARGE 9" HEXAGON
Dimensions of Finished Casting:
• 9" tall, 10 1/4" wide point to point, and 3" deep (22.8cm tall, 26cm wide, 7.6cm deep).
• Requires approximately 3400ml/115 fl oz of resin
--------------------------------------------------------------
• All surfaces inside the mold are smooth and shiny - no more sanding/polishing your finished piece!
• Easy set up - no tape or screws necessary. Just mix your casting material and pour.
• Unlike HDPE molds, there are no scratches on the surface of the mold which eliminates the need for flood coats
• Made from high quality platinum cure silicone - will last many years and can be used over and over again
• Temperature safe up to 450° F.
• Not mass produced - lovingly handmade by me right here in Canada
--------------------------------------------------------------
Our favourite resin is iCoat casting resin HV which you can purchase here: https://tinyurl.com/iCoatcastingHV
Use code ModMold10 for 10% off your order!
--------------------------------------------------------------
{Duties/Import Taxes}
US citizens!! Did you know that you can import up to $800US worth of our products in one shipment without having to pay customs/duties? If you order more than that we will divide your shipment so that each parcel is less than $800US.
Residents of all other countries:
Use this calculator to get an estimate of the amount of duties you'll be charged when the parcel is imported into your country - https://www.simplyduty.com/import-calculator/
Enter 3924.1 as the HS Code.
--------------------------------------------------------------
{Important}
• Do NOT use a torch with this mold! Doing so will damage the surface of the mold and can cause your resin to permanently fuse with the silicone.
• Our molds are not suitable for use with a pressure pot.
• Slow curing or harsh resins may cause your molds to wear out faster and/or lose their transparency/turn white.
Please note that I will not replace molds that have turned white due to the resin used.
Feel free to contact me for information on resins I recommend/don’t recommend.
--------------------------------------------------------------
I love seeing what you create with my molds!
Send me pictures or tag me on Instagram - @modernmoldshop or use #modernmoldshop
--------------------------------------------------------------