Fanatec Direct Drive wheel power supply mounting brackets. You can use these brackets to securely mount your Fanatec direct drive wheel power supply (PSU) to your aluminum profile sim racing rig. These will fit the current Podium DD model as well as the older DD1 and DD2 model. The bracket holes accept size M6 bolts, are spaced 40mm apart and designed to fit 40 series or comparable aluminum extrusion.

If you have the PSU mounted on a motion platform, I found the power cable may want to work its way out. In that case, you can specify the option to have one of the brackets made with a power cord tie hold down. You can use this to zip tie the power cord to the bracket and prevent it from coming loose.

The standard configuration has the holes centered on the bracket. There is also a flush mount option where the mounting holes are offset, which will allow you to mount your power supply flush with the bottom of the profile. The flush mount option is useful if you don't have much clearance below your rig and need the power supply to be flush with the bottom edge. The flush mount option is not available with the cord tie, as I figure anyone with motion added to their rig will have clearance.

=== Version Options ===

+ Standard: Holes centered on bracket
+ Flush Mount: Holes offset on bracket
+ Cord Tie: Includes cord tie option. Holes centered on bracket

=== Include Hardware Option ===

Comes as a set (2 brackets). Includes the brackets only. Does not include the power supply or mounting hardware, but four M6 button head bolts and high quality press in style t-nuts are available for $3.75. If you are not familiar, press in t-nuts are better (albeit a bit more expensive) since they could be inserted into the middle of profile directly. Select the M6 hardware option to include the hardware.

=== Other ===

Available in several colors. Please specify color when ordering.

If you want the power cord tie option specify that option when ordering.

Printed using high quality PLA+ for optimal strength.