Confirm your Lordship and right to be heard! Complete your Jack Sparrow . . . sorry . . . CAPTAIN Jack Sparrow cosplay with this do-it-yourself “Piece of Eight” strand kit.

The kit was modeled using reference photos of props, real-world items, and screen captures from the films. The strand design can be altered to appear like either the one used in the “Curse of the Black Pearl” film or the one used in both of the “Dead Man’s Chest” and “At World’s End” films. The two designs have only one bead difference. Great for cosplay or for private display, this prop replica looks amazing when completed!

This set is 3D-printed and comes both unassembled and unpainted; have fun painting and assembling your own “Piece of Eight” strand. Choose from either the whole kit or just the Burmese Pya coin medallion.

Four of the beads are printed in clear resin so that you can imitate translucency. Or, paint them opaque—it’s your call.

Some remnants of the support structures may still remain on the parts from the printing process—they are easily removed with sandpaper. All parts are printed in high resolution.

Make sure to prime the pieces before painting to ensure proper paint adhesion. And, don't forget to add a few coats of varnish at the end for protection.

⚠️ NOTES

This listing is for a physical 3D printed prop, not a digital file. Minor variations may occur — that’s the charm of handmade loot.

🪙 DISCOVERED TREASURE—LAST ONE!

Rummaging through the vault for rum, I discovered a single “Piece of Eight” Strand kit! This is the last one for a while until I make more sometime in the future. Also, …

The “Piece of Eight Strand” typically has one bead that has two interchangeable designs, one that was used in “Curse of the Black Pearl,” and one that was used in both “Dead Man’s Chest” and “At World’s End.” Unfortunately, the “Curse of the Black Pearl” bead is out of stock, so it will not be included in this set.

⚓ WHAT YOU RECEIVE

• Your choice of one physical 3D-printed kit: “Piece of Eight” Stand (the whole kit ‘n kaboodle) or Burmese Pya Coin
• Printed in crisp, detailed SLA resin
• Cleaned, cured, and ready for priming and painting
• Lightweight, durable, and adventure-approved
• These items are 3D-printed and come unpainted (your inner pirate painter will thank you)

🖨️ 3D PRINTING INFO

• Born on an SLA 3D resin printer
• Printed at a 0.025 mm layer height for sharp, treasure-worthy detail
• Some tiny support remnants may remain — easily banished with a bit of sandpaper (no sword required)

📏 DEFAULT DIMENSIONS

(Perfectly sized for pirate mischief — but can be scaled on request)

• Roughly 1:1 scale based on reference images.
• Entire “Piece of Eight” Strand: 3.32 x 0.85 x 0.31 in (8.43 x 2.15 x 0.8 cm)
• Burmese Pya Coin Medallion Only: 1.02 x 0.85 x 0.25 in (2.6 x 2.15 x .64 cm)

🏴‍☠️ WHY YOU’LL LOVE IT

• Rope-wrapped pirate charm inspired by Jack Sparrow
• Ideal for cosplay, LARP, Halloween, and nautical shenanigans
• Easy to attach to wigs, dreadlocks, or costume pieces
• Crisp resin detail that brings every twist and groove to life

🎨 FINISHING & PAINTING TIPS

Your piece arrives unpainted, ready for your artistic voyage. For best results:

• Prime first — even pirates need a good foundation
• Lay down a silver base coat
• Add a dark wash to reveal all that ropey texture
• Finish with a few coats of varnish to protect your hard-won treasure

Fast, fun, and incredibly satisfying.

🏴‍☠️ PRINT IT YOURSELF!

Prefer to craft your own treasure from scratch? Grab the STL digital file here: https://www.etsy.com/listing/1275749013/pirate-dreadlock-band-3d-printing-stl