If you have any questions or need any clarifications, please contact me and find out everything you are interested in. This will help you to avoid mistakes and misunderstandings in future.

Besides you can download a free trial files here: https://www.dropbox.com/home/%D0%9B%D0%B8%D1%81%D1%82%D1%96%D0%B2%D0%BA%D0%B8 (postcard), https://www.dropbox.com/home/%D0%9A%D0%B0%D1%82%D0%B0%D0%BF%D1%83%D0%BB%D1%8C%D1%82%D0%B8 (catapult), https://www.dropbox.com/home/%D0%9C%D0%B5%D0%B1%D0%BB%D1%96 (furniture).

I have the standard Etsy promo code for the second purchase. To receive the promo code, you must be subscribed to the Etsy newsletter.

You can sell products physically made from my layout you bought, but you cannot sell the layout itself.

You need to check information about charge, any additional taxes or fees at the customs service for your country, as I am not able to keep track of this issue in all customer countries. Keep in mind that the weight, size, and amount of your purchase may be taken into account. Sometimes it is cheaper to order several items in several parcels rather than one.

You can download manual if you follow the link using the QR code inside the box.

Sometimes errors can occur while uploading files from Etsy. Or there may be several other reasons for this. Contact me and if your product is paid for, I will send you the files by email.

If you need another format than it would be better to contact me before you buy so that I can be sure I have the ability to make the format you need.

I do not sell layouts of airplanes, cars, or tanks that I sell as physical goods.

At the moment I am not developing new models of trucks, cars or airplanes.

I can design a layout for postcards, maps, or other products similar to those I sell and put it up as a new product. But I live in Ukraine, where there is a brutal war going on. So my work can be highly dependent on rocket attacks or power outages. From time to time I just don't take on a job if I know I won't be able to finish it or even start it. So it is better to write to me and ask me about it.

Unfortunately, I don't make major changes to my layouts. If you need to change a small detail, you can write and ask me about it.

Several cards and photo frames have the option to change the text. The font is either in the archive and you can set it or I can send it to you additionally.

All text in maps is converted to curves.

I absolutely do not recommend changing the size of the constructor, because it is designed for a specific thickness of wood - 3 mm. It's better not to reduce the size of the maps too much, as the letters may merge.

Before buying, look through all the photos again and make sure you are satisfied with the design of the product. After all, you are responsible for all the changes you make to the layout. On the contrary, I am responsible for making sure that your product is as similar in design as possible to what you see in the photo.

The dimensions of the product and the largest elements are indicated in the product description and on some of the product photos.

My files were made for use on a laser (or CNC) and have not been tested on a plotter. The construction sets are designed for a thickness of 3 mm, the photo frames with a stand are designed for a thickness of 3 or 3.7 mm. I am not responsible for the successful use of my layout on wood of other unrecommended thicknesses or on a plotter.

The construction sets are designed for a thickness of 3 mm. The holes 2,9 mm are made with the thickness of the laser beam in mind, which will add a fraction of a millimeter to each hole.

Some wood may be uncalibrated and have slight variations in thickness throughout, that will have a minor effect on the assembly of the construction set. You may need glue for a piece that is too thin, or sandpaper for a piece that is too thick. If you think it's not the thickness of the material, then send me screenshots, photos, measurements. I'm unlikely to be able to help you or accept any claims without it.

The gaps forms bridges to keep the parts from falling out of the base. The stuked parts won't interfere with the laser during cutting, you don't need to collect them from the laser waste box, product looks better as a present. The bridges are small, so you can easily remove it from the base. I do not make layouts without bridges.

A superficial cut can be obtained by setting the cutting to high speed and low power. This way you get a thin line that does not cut through the material. A superficial cut is an open line. If you use Glowforge this mode is called "scoring". An engraving, on the other hand, has a closed line and covers the designated area.

The superficial cut (scoring), engraving, and cut in my layouts are marked with different colors. If you want, you can select all the elements of a particular color and remove them from the layout.

The cards have small cuts where needed to indicate the fold.

I recommend cardboard or paper with a density of 250-300 g/m2 - this will allow the card to be thick enough to hold its shape and thin enough for all the elements to be cut through.

Most of the small islands like Hawaii are not present in my world maps. If you are interested in a certain island, it is better to ask about it before buying.

World maps are divided into continents. The borders of countries are a superficial cut, so countries are not divided.

I use double-sided tape to fasten the parts of the photo frame, and I recommend it to you. It is more convenient.

I sell only those layouts that I have created and tested on my own equipment, so absolutely all my Etsy products are tested and working. Moreover, I have my own production company in Kyiv - I produce and sell most of my Etsy products in Ukraine, and I use my layouts myself. I have my own equipment, so I understand all the stages and processes of production. All my recommendations are based on many years of experience.