Kura Bed Stickers Mermaid tail. Princess room décor with IKEA KURA decals.

Pastel mermaid scale Kura bed panels — peel-and-stick decals that upgrade the IKEA KURA without paint or tools. Affordable room update that quickly creates a cozy girls sleep space.
✔ Peel & stick.
✔ Anti-scratch protect.
✔ Easy to install without bubbles.
✔ Waterproof.
✔ Removable.
📞📞📞 Indicate your mobile phones, please! This increases the chance of faster delivery.

-Loft set ( (US|CA|AU)
4 decals 38″ x 9.25″ (96.5cm x 23.5cm) for the side panels
1 decal 59″ x 9.25″ (150cm x 23.5) for the front panel

-Low set (US|CA|AU)
4 decals 38″ x 9.25″ (96.5cm x 23.5cm) for the side panels
1 decal 74.8″ x 9.25″ (190cm x 23.5) for the front panel

-Loft set (EU/UK)
4 decals 35.45″ x 9.25″ (90cm x 23.5cm) for the side panels
1 decal 63″ x 9.25″ (160cm x 23.5) for the front panel

-Low set (EU/UK)
4 decals 35.45″ x 9.25″ (90cm x 23.5cm) for the side panels
1 decal 79″ x 9.25″ (200cm x 23.5)for the front panel

YOU CAN ORDER EXTRA DECAL FOR SIDE PANEL or LONG SIDE, IF YOU NEED MORE SIDES DECALS.
----------
✔US/CA
1 extra short stripe: 38″ x 9.25″.
1 long ladder side stripe: 59″ x 9.25″.
----------
✔EU/UK
1 extra short stripe: 90cm x 23.5cm.
1 long ladder side stripe: 160cm x 23.5cm.
----------
!!! The IKEA Kura bed does not come with this order.
____

IKEA KURA Bed Decals FAQ

Q1. What is this?
Peel-and-stick vinyl decals sized for IKEA KURA bed panels. Instant makeover without paint; themes from playhouse to decorative.

Q2. What comes in the Standard Set?
4 short strips (bed ends) + 1 long strip. Choose the long strip for the ladder side (loft setup) or for the non-ladder side (low setup).

Q3. I need more coverage.
Add an extra short strip for the foot end, or add an extra long strip to cover both sides of one long panel. If you need the long strip for the non-ladder side, select “ladder side long strip” and leave a note “non-ladder side”.

Q4. Does it fit both KURA configurations?
Yes. Works for loft or low setups. Tell us your setup at checkout.

Q5. Custom sizing for KURA?
Not needed: sizes match KURA panels. Order extra strips only if you want to cover additional sides.

Q6. Finish and material
Premium indoor vinyl (low-glare). Thicker/denser than typical decals: resists stretching, holds shape, applies smoother, fewer bubbles.

Q7. Why is installation easier with these decals?
Protective top layer reduces curling and allows minor repositioning during placement. Denser film helps avoid bubbles/creases; colors stay vivid with regular cleaning.

Q8. How do I install it?
Dry method (recommended for narrow strips): clean and degrease, align to the edge, peel-and-stick while smoothing with a felt squeegee.
Wet method (optional): a light mist of water with 1–2 drops dish soap per 1 L can help reposition.
Tip: if the bed is already assembled, long strips are easier to apply with a helper.

Q9. Surface compatibility
Clean, smooth KURA panels (laminated wood). Do not apply to dusty, textured, or oily surfaces.

Q10. Is it renter- and kid-room friendly?
Yes. No paint or tools; removable with gentle heat and normal care.

Q11. Personalization and customization
Many sets support a child’s name on the long panel. Color tweaks are possible. If you have a different bed model (not KURA), ask about made-to-fit sizing for that model.

Q12. Care and cleaning
Clean the panels the same way you did before applying the decals. The protective top layer tolerates normal household cleaning (including mild alcohol-based cleaners). No special products required.

Q13. What’s included
The strip option you select (set or individual strips) and a quick step-by-step install guide.

Q14. Shipping and timing
Made to order. Production begins after we confirm your setup/options. Tracking provided.
FAQ — KURA Bed Decals (with Protective Top Film)

Q: What makes this set different?
A: This is my USP: I use a protective top film for a cleaner, tougher, matte finish. Many competing decals are plain thin vinyl without this layer, so they scuff easier and are harder to install cleanly.

Q: Will the edges lift or corners curl?
A: No. The protective top film keeps panels flat and stable. Edges stay put when you apply to a clean, dry, smooth KURA surface.

Q: Do bubbles form under the decal?
A: Practically no. The material lays down smoothly; any trapped air pushes out with a soft cloth or an old plastic card in 1–2 passes.

Q: Can I lift and re-place during install?
A: Yes. You can gently lift and lay back down without stretching or warping the panel.

Q: Is removal easy?
A: Yes. It comes off cleaner than thin stickers, without gummy residue in most cases. (Tip: warm the surface slightly if your room is cold.)

Q: Can I install on an assembled bed?
A: Yes. You can apply on a fully assembled KURA. It’s just easier with two people because long strips are awkward to hold in the air. If the bed is disassembled, one person can handle it.

Q: Are the strips pre-cut? Do I need extra tools?
A: All panels are pre-cut to KURA sizes — no trimming needed. Just choose your country/region and bed type from the dropdown.

Q: How do I choose the correct size (US/CA vs EU/UK)?
A: If you live in the US/Canada but your KURA came from Europe, pick the EU/UK option (and vice-versa). Unsure? Measure the length of any one short panel:
- 90 cm (~35.4") → EU/UK size
- 96.5 cm (~38.0") → US/CA size

Q: Ladder vs. Non-Ladder — which option should I pick?
A: Choose “Ladder Side” if your KURA uses the ladder on that long panel; choose “Non-Ladder” for the plain long panel. I prepare sizes for both US/CA & EU/UK KURA.

Q: I have the low setup now but might switch to the loft later. What should I buy?
A: Get the full set now and add the optional “Ladder Side Strip” — you’ll be ready when your child grows into the loft setup.

Q: How durable is the surface?
A: It’s wipe-clean and stain-resistant, with a scratch-resistant matte finish that photographs without glare.

Q: What surfaces does it work on?
A: Smooth, hard KURA panels only. Wipe dust and oils off first. Avoid raw wood, textured paint, or silicone coatings.

Q: When should I install?
A: Before assembly is fastest; on an assembled bed it’s also fine — just have a helper. Aim for room temperature (18–24°C / 65–75°F).

Q: How do I clean it later?
A: Wipe with a soft cloth and mild soap solution. No abrasives or harsh solvents.

Q: How long does it take?
A: 60–90 minutes for a full set; single strips are much quicker.
_______
SHIPPING & IMPORT FEES
🇪🇺 EUROPE (EU): All import fees included. No extra courier charges on delivery.
🇬🇧 UK: All import fees included. No extra courier charges on delivery.
🇺🇸 USA: DDP shipping — all duties/import fees are covered. Nothing to pay on delivery.
🇨🇦 CANADA: In most cases no extra import fees on delivery. If customs does charge, these fees are the buyer’s responsibility.Transform a plain IKEA KURA bed into a themed centerpiece for your girl’s room — without painting, rebuilding, or permanently changing the bed. These removable panel decals are designed for parents who want to create a more playful, personalized KURA setup, from rainbow and floral themes to soft decorative room designs.

Each set is pre-sized for IKEA KURA panels, making it an easy way to give an existing bed a completely different look while keeping the original furniture underneath.