Bearded Dragon Digital .STL File for 3d Printing, Articulated Fidget Figure, Print-In-Place Body, multicolor 3MF, Cute Flexi

⚠️This is a DIGITAL DOWNLOAD, and NOT a physical product. If you want an already printed version, they are available to purchase from Authorized Sellers here on Etsy and on the web.⚠️
**Due to Etsy's digital file size limit, upon purchase you will get a PDF file that contains a Download Link to the purchased STL files.

Updated: Multicolor 3MF now included!

I hope you enjoy my articulated Bearded Dragon Digital .STL file for 3D printing! He's really fun to fidget with and pose. Speaking of posing... I added a new mechanic to the front arms that locks them against the chest. This allows for really cute propped up poses! Give it a try!

Here is a quick video showing how to attach the Head onto the body (demo'd on the Crested Gecko): https://youtu.be/P9llZj7NBvs?si=qDMjVCaGtGffJV4X&t=57

Here's a short video showing how the arm locks work: https://youtu.be/QM0dozGDUOc

PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To legally sell PRINTS of my designs, you can obtain authorization by joining the "Merchant" Tier of my Patreon or MMF Tribe:
https://www.patreon.com/matmire_makes
https://www.myminifactory.com/users/MatMireMakes?show=tribe


❗3D PRINTING SETTINGS❗
Includes 3 STL Files and one 3MF:
*Recommended:
- Head with Pre-Supports: Supports are already built into the model. No need to generate them!
- Body with Custom Brim: Print-in-Place, Brim geo is built in so no need to generate one. No Supports needed.
- Multicolor 3MF: Compatible with PrusaSlicer and Bambu Studio
- 10-20% Infill.
- 3 Walls.

*Extras:
- Body no brim: Print-In-Place. No Supports

*Good bed adhesion is a must for successful printing. If you find you are having adhesion issues, use a brim/raft or use the body model with the custom brims built in. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

100% creates a 10" model, so that will make it easy to scale it to your desired size. (80% = 8", 75% = 7.5", etc.) Depending on your printer tolerances, you should be able to print close to 60-65% before the joint function may start to become compromised. Your mileage may vary.

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.