These bent wood brackets brace the chair seat and the back of the chair. These brackets are made of oak and are unfinished. If you use these as a side brace, you only need to finish the ends. If you are using them as a hip hugger from the top of the seat you will probably need to do a little flattening and rounding.

For sizes, look at the picture with the Color Lines for reference. Diameter is roughly about 7/8 inches.

Color Size Diagram: **Please note: ALL measurements are approximate**
Green Line -- 9-1/2"
Red Line -- 11-13/16"
Yellow Line -- 10-3/8"
Purple Line -- 5-1/4"
Blue Line -- 8-3/8"

These are unfinished, so they will need to be sanded to get all of the rough edges off and smoothed out. Some burn marks might be on the ends etc, so you will need to prep them before you stain or paint them.
Since wood is a natural material, wood grain direction and pattern and color light/darkness will vary from the picture. Each brace is unique has it's own patterns and markings making it unique.

Sold by the Pair Only, no mounting hardware included.

FK-O-19