Teexpert Deep Pour Epoxy Resin Kit 2-4 Inch, Crystal Clear Liquid Glass Casting Resin for River Table, Wood Filler and Live Edge, 2:1 Mix

Teexpert Deep Pour Epoxy Resin Kit 2-4 Inch, Crystal Clear Liquid Glass Casting Resin for River Table, Wood Filler and Live Edge, 2:1 Mix, UV Resistant

1. APPLICABLE ITEMS

Especially suitable for deep pouring projects up to 2-4 inches thickness, such as River Table, Wood Filler, Countertop, Pyramid, Ashtray, Wave trays, Coaster, Vase, etc.

2. PARAMETERS

Mixing Ratio: 2:1 Ratio By Volume
Mixing Time: 5-15 Mins
Work Time: Up to 60 Mins
Cure Time: 24-48 Hours
Next Layer Of Coverage: 6-12 Hours Apart
Heat resistant: Up to 203 °F
Fully Cured: 3-7 Days
Application Thickness: 2 inches, up to 4 inches
Operating Temperature: 70-80°F

3. ARTISAN-APPROVED QUALITY

24-48 Hours Curing Time
High Gloss & Clear Finish
3X Self-defoaming, Bubble Free
Hard as a Rock- 85D Hardness
Pro UV Resistant
Self-Leveling
Anti-Yellowing
Impact & Abrasion Resistant
Nontoxic, No VOCs


TIP & TRICK

1. OPERATION GUIDE:

- Pre: 2:1 Mix ratio. Please make sure to mix according to a 2:1 volume ratio;
- Fully mixed: Upon mixing, be sure to scrape the sides and bottom of the mixing container to ensure all resin and hardener are fully blended. Failing to do so can result in soft spots in the coating;
- Pouring: NEVER scrape or brush the sides or bottom of the container you just mixed. There will always be an unmixed portion which can be dislodged and will leave a wet or sticky spot on your coating;
- Remove Air Bubbles: The best tool for removing air bubbles is a small torch, hold the flame about 6 to 10 inches from the tabletop, and use an ironing motion to sweep quickly across the surface;
- Temperature: Please ensure that the operating temperature is 70°F-80°F;
- Wait for curing: It will take about 12-24 hours to dry to the touch. Best cure after 3-7 days.

2. NOTE:
- Not for tumblers craft;
- Resin is extremely difficult to remove from clothing, carpets, and other porous materials. Use in work environments, not kitchen tables, countertops, or carpeted areas;
- Cleaning can be done with rubbing alcohol, mineral spirits, acetone, or other mild solvents;
- Unopened products are best used within 1 YEAR.


💎【POUR DEPTH UP TO 4 INCH】Teexpert 2:1 Mix Deep Pour Epoxy Resin is specially researched and developed for deep pouring projects, such as river table, countertop, wood filler, etc; 2-4 inches of thickness can be filled at one time; Very suitable for various DIY resin art, river table, coating bars, countertops, jewelry, coasters, etc, the whole time to work is about 60~80 minutes, it is enough to do your art creation

💎【Pro UV Protection & Hardness 85D】 Most epoxy resin will turn yellow in a short amount of time under UV light, Teexpert Pro crystal clear epoxy resin has high resistance to any chemical, heat, water & the sun, It can be preserved for a long time without yellowing, After curing, the hardness of this resin is higher, and the hardness index can reach above 85D, hard as a rock to resist scratch

💎【Safe & Odorless Epoxy Resin】: The clear casting epoxy resin is safe to use indoors, non-odor, Non-Toxic when fully cured, no VOCs, No BPA, No Fumes, Non-Flammable, UV resistant, we recommend wearing gloves while handling the liquid state epoxy resin directly, Ensuring a warm room temperature 70 °F – 80 °F for best cure & degassing

💎【Self Leveling & No Bubbles Art Resin】 The crystal clear deep pour epoxy resin is specially formulated for artists, you have no need to measure, just self-leveling, please stir the mixing resin and hardener slowly including the wall and the bottom of the cup, making sure the A and B to mix fully, 3X-defoaming, you don't need to worry if there are bubbles, It will eventually disappear

💎【Easy to Integrate Color & 100% Guarantee】 Teexpert deep pour resin mixes flawlessly With epoxy resin color Pigments, mica powders, mica pigment, resin pigment, and alcohol ink, like black diamond pigments & creates a superb colored epoxy for wood! Apply for a full refund if you do not like the clear epoxy resin kit