Mount your vinyl records on your walls with these vinyl record display brackets, 3d printed to order in a range of colours.

Why buy these ones?

* Sympathetic design - the record's the star.
* No screws. Command Strips are strong enough to hold a double but can be removed easily.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* High quality.
* A whole range of colours.

(Please read below for more info, including fitting instructions.)

-------

They will hold a single or double LP. (Actually, you could use them for 10" or 7" records as well, though obviously they'd need to be closer together.)

Every order will include the right number of Command Strips to hang them.

The shelves are deep enough to hold a standard gatefold double.

A note on the colourless option: the plastic is colourless, but because 3d printing involves laying down a bead of plastic to make a layer, and then printing layers one on top of the other, it's not clear like glass. The effect is a bit like frosted glass.

A note on dispatch times: I set my dispatch times pretty accurately but if you need something by a certain date just let me know.

-------

FITTING INSTRUCTIONS

1. I find it's easiest to choose a sleeve that has a geometric pattern so you can use that to line them all up perfectly. Pink Floyd's The Wall is perfect!
2. Clean the back of the bracket and the wall with an alcohol wipe or rubbing alcohol to ensure both are clean and free of dust and finger marks.
3. Make sure the wall is painted (not wall-papered - I don't care what anyone says, sticking an adhesive strip to wallpaper is a bad idea), is not flaking, and is flat (not textured like artex or woodchip). (The paint needs to be well-adhered to the wall. If paint peels away, that's a problem with the paint, not the Command Strips.)
4. Place the Command Strip on the back of a bracket, ensuring it doesn't overhang. Pay attention to the side you're sticking - it'll be the side with the red text that goes on the bracket, and the side with the black text goes on the wall. The removal tab will stick out the end, but make it so that’s the flat end and it'll be hidden by the record anyway. Press firmly through the back of the bracket for ten seconds onto a flat surface to stick the Strip firmly to the bracket.
5. I'd suggest you start with one of the bottom corners (see the listing for photos for how to lay them out relative to the sleeve). Remove the other backing strip, line up where you want the record to be on the wall (use a spirit level to ensure it's level) then remove the record and press firmly, with both hands, on the back surface of the bracket for another ten seconds. (It’s important to do the pressing twice - once when you put the strip on the bracket, and again when you stick the bracket to the wall. This will ensure they stick properly.)
6. Repeat this for the other bottom corner, then use the record sleeve to line up where the top one should go. I'd advise lifting it a mm or so off the top of the sleeve to make sure there's enough room to slide a sleeve in and out. Some sleeves are slightly bigger than others so it’s a good idea just to double check you’re not using a particularly small one before you do this.
7. Leave it at least two hours before putting anything on them and check they’re stuck firmly.

Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records and sleeves. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. If you put one up and it falls down (which really shouldn't happen if you've followed the above instructions) please don't try to re-use the Command Strip - they won't work a second time. I'd rather you got in touch and I'll send you some more.

-------

Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.

Thanks
Rob

Manufacturer(s):

Manufacturer: No Time Like The Gift, Franchise House, Station Terrace, Leadenham LN5 0PH, UK. Email: causonr [!at] gmail.com
EU Responsible Person: Easy Access System Europe Oü, 16879218, Mustamäe tee 50, 10621, Tallinn, Estonia. Email: gpsr.requests [!at] easproject.com

Product safety:

Intended use: For indoor use only. Designed to hold one record sleeve at a time. Adhesive strips must only be used on clean, dry, sound surfaces that are free of dust and contaminants. Only for use on smooth, painted surfaces. Paint must be well-adhered. Not for use on wallpapered or textured surfaces.

Safety warnings: Not a toy. Keep out of reach of children and pets. Do not overload. Max weight limit 450g (1lb). Exceeding the weight limit may cause the shelf to detach from the wall, causing damage to the brackets and/or the wall and/or the record sleeve. Avoid impact. Plastic can break if struck, causing sharp edges. Keep away from heat and direct sunlight. Temperatures above 40C or 104F can cause deformation and render the product useless.

Cleaning and maintenance: Dust gently with a soft, dry cloth or soft brush. Do not use chemicals.

Disclaimer: These brackets are not load-tested beyond the specified capacity. Use at your own risk. No Time Like The Gift is not responsible for damage caused by misuse, improper installation or environmental factors.