Tall Academic Font There’s only one size BX font because it’s a native font, which means it’s completely scalable within the parameters I set. Just like the fonts that came with the software only have one size, this one is the same way. Hope this helps!

Chenille Yarn Designs: Yarn Size The size of yarn depends on the design. Larger hoops or shorter words can accommodate thicker yarn. My preference is Bernat Blanket Extra. It’s fluffy without being so bulky and works on many designs, even ones with more letters. The thickness of the yarn will differ depending on the size your using. Even at the largest size, this design probably needs a fairly thin yarn. I don’t really know sizes, but I think number 6 is probably a decent size. I would definitely run a test stitch on stabilizer to make sure it’s readable. Needle Size I just use the same needles and thread that I use for everything else—organ 75/11 embroidery needle and Madeira polyneon thread.

Report this item to Etsy

TEACH Arched Satin Applique Embroidery Teacher Design Five Sizes 5x7, 8x8, 6x10, 7x12, and 8x12 Hoop

Name: TEACH Arched Satin Applique Embroidery Teacher Design Five Sizes 5x7, 8x8, 6x10, 7x12, and 8x12 Hoop
Brand: JustSewEmbroideryKY
SKU: 1403887765
Price: 4.00 USD
Availability: InStock
Rating: 5.0 (14 reviews)

JustSewEmbroideryKY

Item highlights

Digital download
Digital file type(s): 1 ZIP

Seller's description

Show your teacher appreciation with this cute arched applique "TEACH" design!! It comes with a satin edge stitch. You can omit the fabric for an outline design.

This listing includes five sizes:
5x7 - 4 11/16 x 7 inches with 15,235 stitches
8x8 - 5 3/16 x 7 13/16 inches with 17,017 stitches
6x10 - 6 ¼ x 9 ⅜ inches with 20,090 stitches
7x12 - 7 x 10 9/16 inches with 22,649 stitches
8x12 - 7 ¾ x 11 11/16 inches with 24,845 stitches

This is not a patch. No physical product will be sent to you. This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws. 

This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm) 
4x4 (100mm x 100mm) 
5x7 (130mm x 180mm) 
6x10 (160mm x 260mm) 
8x8 (200mm x 200mm) 
7x12 (180mm x 300mm) 
8x12 (200mm x 300mm) 
9.5x14 (240mm x 360mm) 
10.5x16 (272mmx460mm)

APPLIQUÉ INSTRUCTIONS:

Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.

Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.

Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.

Step 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.

Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.

For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.

Happy Stitching!

Item review

Why this review appears

All reviews are from verified buyers. This review is shown automatically based on factors like recency, whether it includes comments, your chosen language, and whether the rating reflects the typical experience with the shop.

Summarized by AI

Great quality Love it