Mando Concord 3.75" 3D printed resin action figure, unpainted and unbuilt model kit StarWars inspired

English:
Warning: this model is extremely fragile and is intended for experienced model builders.

3D printed resin unpainted figure, 1/18 or 3.75". Needs cleaning of the supports, building and painting.
Please note that due to the fragile nature of the resin, this figure can't be considered as a toy and doesn't suit for children before 14.

As many of our beloved characters never got the figure they deserved, I try to fill this gap by making them myself.


Material: gray photopolymer resin
Height: approximately 9.7 cm
Parts: 8
Articulation points: 5

Notes and cautions:
-Fits the 3.75" toys range.
-Figure to build and paint.
-The final product might vary slightly from the photos.
-Handle the material with care, the resin can break easily.
-After printing the resin can encounter some slightly shrinkage, making the fitting of the different parts difficult. It is recommended to use a mini drill and sanding tools to widen the female half of the joint. On the opposite, if a joint is too loose, adding some material around the male half of the joint can help to get the right grip. I personally apply a few points of cyanoacrylate around the peg that I let dry before putting it back in place. If the joint is still loose repeat the operation.



French :
Warning, this model is very fragile and is intended for the most experienced modelers.

Unpainted 1/18 or 3.75" scale printed resin figure. Requires preparation, assembly and painting; the figure is delivered on its stands.
Warning: Due to its fragile nature, this figurine cannot be considered a toy and is not suitable for children under 14 years old.

Since many characters have never had miniatures made in their likeness, I am working to fill this gap.


Material: Grey photopolymer resin
Height: approximately 9.7 cm
Number of rooms: 8
Points of articulation: 5

Notes and warnings:
-Scale compatible with the 3.75" figure range
-Figurine to assemble and paint yourself.
-The final product may vary slightly from the presentation photos
-Material to be handled with care as it can break easily
After printing, the resin may undergo a slight shrinkage process, making it difficult to fit the parts together. Using a mini drill and sanding tool is recommended to enlarge the female half of the joint. Conversely, if the joint is too loose, adding material to the male half can help achieve the desired fit. A few drops of super glue work very well for this; let it dry before repositioning the dowel.