Godox V860IIS Flash Gel Mounts, Honeycomb Filters 3D PRINTING FILES Cinematograpy Filming Photography Attachments Accessories

Godox V860IIS Flash Gel Mounts, Honeycomb Filters 3D PRINTING FILES

First of all please watch this video for an indepth explanation of the product
https://www.youtube.com/watch?v=EA5wD6OfkTQ

Included is 8 STL Files:
Godox V860IIS Flash Mount.stl
Godox V860IIS Gel - Base 0.2mm Spacing requires pause whilst printing at 2.4mm so you could insert 5x2mm magnets.stl
Godox V860IIS Gel - Base 0.2mm Spacing Cover - 1mm thick.stl
Godox V860IIS Gel - Base 1.6mm Spacing requires pause whilst printing at 2.4mm so you could insert 5x2mm magnets.stl
Godox V860IIS Gel - Base 1.6mm Spacing Cover - 0.6mm thick.stl
Godox V860IIS Honeycomb 6.8mm requires pause whilst printing at 6.6mm so you could insert 2 x 8x3mm magnets stacked on top of each other.stl
Godox V860IIS Honeycomb 13.6mm requires pause whilst printing at 3.6mm and again at 13.0mm so you could insert 8x3mm magnets.stl
Godox V860IIS Honeycomb 20.4mm requires pause whilst printing at 3.6mm and again at 20.0mm so you could insert 8x3mm magnets.stl

The Mount is the base that the gels and honeycomb filters attach to
I suggest you insert 3 x 8x3mm magnets in each side (this can be done once its printed)

Gels are put together from 2 printed pieces, and Coloured Acetate Sheets
Requires pause during print to insert 5x2mm magnets in each side (please check your polarity of your base mount first)
These come in two types, one that has a spacing for 0.2mm sheets, and the other has a spacing of 1.6mm, if you want to double up, triple, or more layers of acetate sheets, this just increases intensity if youre using very pastel (desaturated sheets)
Once printed, and you cut out your acetate sheet, just put a very tiny drop of superglue in 4 corners to secure the Gel Cover in place

Honeycombs come in three different thicknesses for different concentrations of light
Pretty self explanatory per file names

You are free to sell prints of the files, but please do not resell the files themselves as I put in a week's of work into these

I recommend printing in ASA Filament as flash photography outputs a lot of heat

It is designed to be printed with a 0.4mm nozzle at 0.2mm layer height

Comes with a PrusaSlicer project file that's meant to serve AS AN EXAMPLE
DO NOT USE THIS PROJECT FILE ON YOUR PRINTER as the custom gcode and printer settings are specifically meant for my custom printer, instead only use this as reference

As this is a digital item, there are no options for a refund

https://www.tmprojection.com/links
https://www.instagram.com/tmpro_cos/
https://www.instagram.com/tmprojection/
https://www.instagram.com/tmprojection_com/
https://www.tiktok.com/@tmprojection
https://www.facebook.com/TMProjection
https://www.ebay.co.uk/sch/i.html?_ssn=tmprojection