Flipper Zero WiFi Devboard Case, PETG with Steel Bolts, 2 Lids, Pin Bumper
6 views in the last 24 hours
Price:$11.99
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
Returns & exchanges accepted
You can only make an offer when buying a single item
Highlights
A tough PETG case for the Flipper Zero WiFi Devboard, bolted together with steel M3 hardware instead of snap-fit tabs. Redesigned, refined and printed by Z-Axis Labs.
Built for anyone who carries their devboard in a bag, plugs cables in and out a lot, or wants more rigidity than a snap-together print.
📦 EVERY ORDER INCLUDES
• PETG case in your choice of White, Black, Orange or Frosted Clear
• TWO lids: a capped lid that covers the chip to protect it, and an uncapped lid that leaves the chip open for airflow. Swap whenever you like.
• 4 carbon steel M3 nuts, already heat-pressed into the case, plus 1 spare
• 5 M3x8mm steel bolts (4 needed + 1 spare) in a small clear bag
• Pin-protection bumper in your chosen color (if none is chosen, I ship the color I have the most of)
• Black TPU USB-C dust cover
• Cybersecurity sticker in a protective baggie
• Sometimes a small bonus item related to the case, while supplies last
🚫 NOT INCLUDED
• Flipper Zero and WiFi Devboard (the board in photos is there to show fit)
• 2.5mm Allen (hex) key, needed for assembly
• Items used for presentation in photos, including OMNIFIXIO
🛠️ FEATURES
• PETG: more heat-tolerant than PLA, good for daily handling
• Nuts are pre-installed in recessed pockets, so there is nothing to fiddle with at assembly
• Steel hardware that won't crack the posts the way plastic pegs can
• Reinforced center section for extra rigidity
• Uncapped lid gives the chip room to breathe
• Helps protect the exposed PCB from bumps, dust and accidental shorts
📐 FIT
Made for the official Flipper Zero WiFi Devboard. Buttons and the USB-C port will be accessible on both lids. Unsure about your board? Message me before ordering.
🔧 ASSEMBLY TIP
Tighten each bolt until it is slightly snug, back it off a little, then tighten further. Repeat until the bolt head sits below the surface of the case top. Don't overtighten.
🖨️ ABOUT THE PRINT
Printed in PETG, so expect fine layer lines and slight color variation. Frosted Clear and Tech Green is translucent, not 100% visibility see-through. Every case is cleaned up and checked by hand when your order comes in.
🚚 SHIPPING
Orders placed before 2:00 PM ET Monday-Friday, or before 9:00 AM ET Saturday, ship the same business day. Later orders ship the next business day. In rare rushes it can take slightly longer. Each case is packed with cardboard on the top and bottom and wrapped tightly in bubble wrap so nothing moves in transit.
Occasionally a package isn't scanned until it reaches a later facility, so tracking can sit still for a bit. If it does, message me and I'll look into it right away.
🔙 RETURNS
• You have 14 days from the day the package is marked delivered to start a return. Time in transit doesn't count.
• Undamaged cases: refund of the item price once the case is back with me in its original condition. Original shipping and return postage are not refunded, and return shipping is paid by the buyer.
• Arrived damaged? Message me within the 14 days with a photo of how it arrived and I'll send a replacement. You don't need to send the damaged one back. Please keep the bumper, nuts and bolts from it, since they are usually still good.
💬 QUESTIONS?
Message me before or after you order. I answer every one.
Not affiliated with, endorsed by or sponsored by Flipper Devices Inc. "Flipper Zero" is a trademark of its owner and is used here only to describe compatibility.
-
Order today to get by Nov 27-30
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
-
Returns & exchanges accepted within 14 days
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
-
Cost to ship: $5.65Enjoy free shipping to the US when you spend $35+ at this shop.
-
Ships from: United States
There was a problem calculating your shipping. Please try again.
Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases —
see program terms
Reviews for this item
What buyers say, summarized by AI: Great quality Fits well Fast shipping Love it Looks great As described Helpful seller
Better than expected this is a super high quality case. And the seller was very generous with spare parts in case they are needed in the future. Could not be happier.
Response from Isaac Keller
Thanks a lot for the 5 stars! Customers like you keep this shop going =)
Shipped quickly and is exactly what I was looking for.
Fits the WiFi board well. Pin protection effective.
Love it! Fits perfectly, very happy with the quality. All hardware included (plus extras!). Highly recommend!
Photos from reviews
More from this shop
Visit shop-
Flipper Zero Wi-Fi Devboard Protective Case – Snap-Fit ESP32-S2 Enclosure for Add-On Module | Slim, Durable Design
$9.99
-
Flipper Zero WiFi Dev Board Case – Full Colour UV Printed Custom Designs
$14.90
-
Carbon Fiber Flipper Zero WiFi Dev Board Case, New Colors Edition, RC Accessory by BossCoDesigns
$18.99
-
Flipper Zero WiFi Dev Board Case: Minimalist 3D Printed Hard Case with Pin Protector
Sale Price $26.20
Original Price $32.75
-
Premium Flipper Zero Wifi Devboard Case plus Pin Protector, Exposed Heatsink Enclosure, Hard Case with Screws
Sale Price $29.48
Original Price $36.85
-
Flipper Zero WiFi Dev Board Case Minimalist No Screws Enclosure plus Pin Protector
Sale Price $16.36
Original Price $20.44
-
Flipper Zero WiFi Dev Board Case, Premium Protective Case, No Hardware Needed by BossCoDesigns
$18.99
-
Flipper WiFi Devboard case
$14.99
-
Flipper Zero WiFi Dev Board Case: Screwed Protective Cover
$24.08
-
Flipper Zero Marauder WiFi Dev Board Case plus Pin Protector
Sale Price $35.99
Original Price $44.99
-
Protective Case Compatible with Flipper Zero WiFi Devboard, Durable Storage Box (Case Only)
Sale Price $23.22
Original Price $30.96
-
Flipper Zero WiFi Dev Board Case, Premium Carbon Fiber Finish, No Hardware Needed by BossCoDesigns
$18.99
Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.
Shoppers with similar taste loved these
-
Flipper Zero Wifi Devboard Case Anime Eyes Custom Case plus Pin Protector
Sale Price $63.40
Original Price $79.25
-
Flipper Zero WiFi Dev Board Case, Premium Carbon Fiber Finish, No Hardware Needed by BossCoDesigns
$18.99
-
Flipper Zero Devboard Case, The Great Wave Design, with Pin Protector Custom Premium Devboard Case
Sale Price $63.40
Original Price $79.25
-
Altoids Mints Tin SD/Micro-SD card holder insert
Sale Price $11.04
Original Price $12.99
-
Topographic Flipper Zero WiFi Devboard Case with Pin Protector
Sale Price $63.40
Original Price $79.25
-
Flipper Zero Case cover minimalist mini
$21.79
-
Digital download
ESP32 DIY 4-heads peristaltic dosing pump project balling reef tank
$4.01
-
Stock Ticker Forex Crypto LIVE Price WiFi LED Display
$139.90
-
CO2 Air Quality Monitor: Digital Thermometer, Humidity Gauge, Blue Night Light
$50.68
-
Computer Tech Nerd Gift, Computer Parts Desk Clock, Recycled Hard Drive, Engineer Gift for Him
$77.98
-
USB 3.0 Gold Plated USB Extension for Simracing - Reliable and Versatile Connectivity
$28.66
-
Wireless Bluetooth Buzzer (Supports Windows, Mac, iOS, Android and more)
$228.19