Size

Stitch 2" X 2" (High X Wide)

Angle 2" X 2" (High X Wide)



1. Keep the back clean before ironing, and adjust the temperature to suit the clothes according to the use of the iron.


2. Put the cloth in the appropriate position (do not tear off the glue) and press it back and forth for a few times, usually about 10 seconds.


3. To prevent burns, cover the patch with a thin layer of cotton (it must be cotton, not faded cloth).After the perm check the edge to see if it is good, perm the edge more.


4 even root decal thickness to determine the temperature, a little thicker, must be higher temperature, hot time longer. For especially thick cloth stick, can be ironed a few more on the back.


5. Special note: for sequins or patches with a bright surface (since sequins are made of plastic) be sure to cover with a cloth and iron at a low temperature (below 130 ° c), or steam directly. Or cover it with a damp cloth. Lest the temperature be too high and the plastic melt.


6. After ironing, sew a few stitches on the edge of the cloth patch with needle and thread to make it more firm and comfortable.


7. If you don't have an iron at home, you can also use the same color thread to sew the cloth on your clothes.


8. Take it to the sewing shop for professional operation to avoid ironing the clothes.
Shipping and Payment >>>>>



Checkout more my items please visit .

https://www.etsy.com/shop/Lightingstudio



........Thank you for looking......iron on patch
patches for Jackets
embroidery patch
Patch for backpack
Patches iron on
Cartoon patches
patches iron on
Patches Pin
Embroidered patches
patches for hats
Disney patches
patches for bags