Ver. 2 - Cosplay Anubis Mask - 3D Print .stl File Download

Inspired by the ultimate gift from the Season of Prophecy in Sky: Children of the Light.

Did you miss the Season of Prophecy? Well. Now you can 3D Print your own mask similar to the ultimate gift and wear it in person. It's not quite the same, but it will make for a great addition to any Sky Children of the Light Cosplay!
There's even a version of the mask with a hole in the forehead if you want to put an LED into the mask.

Contains 4 types of mask variations each with 2 different options for how the halo can be attached.
(To the ears or to the mask itself)
You will need to add ELASTIC STRAPS to hold the mask on to your head, and ADHESIVE to glue the parts together. (I recommend high temp hot glue, two part epoxy, or a PLA glue gun.)
I also recommend using upholstery foam or styrofoam to hold the mask a bit up and away from your face if you intend to build LEDs into it, or to help perfect the fit.

------------------------------

Please use the following measurements as a guide when printing, and measure the wearer's head prior to printing to ensure you get a good size for wearing, everyone's sizes are a little different. Especially if you have a wider or bigger head!

This was modeled around my own head as reference:
About 21 in / 53.5 cm diameter
About 9 in / 23 cm from top of head to chin

DEFAULT MEASUREMENTS (estimate):
Halo Height: 238.3 mm
Halo Width: 307.8 mm
Ear Height: 209.5 mm
Ear Depth: 28.5 mm
Mask Width: 195 mm
Mask Height: 230 mm
Mask Length: 208.7 mm

------------------------------

If you purchase this file and believe it needs modifications before printing please contact me so I can update the files for you!~
This file is intended for large printers, but if you need me to chop it up into smaller pieces for your printer, just message me with your print bed size and I'll happily cut it into smaller parts you can glue together!

**Any changes made to update this file for easier printing or use will be redistributed to buyers free of charge, simply show proof of ownership and allow for me to contact you or you can contact me on any of my social media!

--------------------------------------

Contact Info:
twt: https://twitter.com/nathahniel
e-mail: nathahnielartist [!at] gmail.com
Etsy: https://www.etsy.com/shop/Nathahniel
Ko-Fi: https://ko-fi.com/nathanier
Gumroad: https://nathahniel.gumroad.com/

-------------------------------
***RULES:***

DO NOT sell or distribute this .stl file
DO NOT upload this file to sites like thingiverse, sketchfab, etc.
You may send these .stl files to an artist to request or commission an edit. The artist is not required to purchase the fileif you are providing it.
You are welcome to use this for crafts other than fursuit heads.

***SELLING BASED ON THESE FILES:***

You may sell up to 20 finished prints of this file per year.
You may not sell the digital files or reupload them elsewhere.