Rose Skull SVG Day of the Dead Digital Download For Glowforge or Laser For 1/8” & 1/4” Material Not a Physical Item Read Item Description

This is a digital file. No physical product will be sold and mailed to you. This has been tested on a Glowforge basic and a pro and a Mira 9 in lightburn as well as in the glowforge interface. The file takes just over one sheet of 11x19” material depending on how you position the pieces.

I recommend cutting this file with MDF. Low end birch has glue voids and tends not to cut all the way through. It also never truly measures 1/8” or 1/4” all the way through. It also chars very easily.

Please be sure you measure your material to know which size stand to use. Ibhave provided 15 different size stands measuring .11” to .26” I recommend owning digital calipers to measure your materials when owning a laser. Measure before you cut the stand so you know which one to choose. The kerf has already been done for you so no need to worry about knowing kerf for this file.

This file has been cut and tested on a GLOWFORGE Basic, Pro and Mira 9 unit. Can be used on alternate types of lasers. You may use this file for small business or craft projects. You may not resell or exchange it with anyone. File can only be used by the purchaser. Please contact with any questions. All sales final, no exchanges or refunds on digital files. Your files will be available after purchase. Image subject to copyright. You are not allowed to use any part of these designs to recreate your file to resell as your own.

2 SVG files included ONLY. No other version is sold. Should you need this in a different format there are websites to convert files to different formats. Convertio is a website where you can do this yourself. Please be sure you know how to download your files after purchase. Etsy will send you a link to your email which will then redirect you back to purchases and reviews on your account. Should you need to download this file manually, you can always go to a desktop version of Etsy and download this file from your account under purchases and reviews.

The skull stands around 8” tall, and fits on a Glowforge Basic. You can cut as many or as little as you like.

This file has been updated to create a more stable base. The jaw line is slightly angled to create a flat base for the stand to adhere to the back without showing. This updated version is more stable however not very noticeably different from the photos.

The stands are in a separate file. Be sure to download both files.

You will need to glue the stand on the back side. There are 15 versions included. The supports on the back are measured for 1/8”, and 1/4” materials. MDF tends to run slightly thinner than wood so be sure you always measure your materials. I cut the bases twice and layered them up for additional support. I glued the pieces together for permanent support. You will also receive 4 different angles that you can choose from to determine how far you’d like this to lean back. Instructions are included on the file.

Choose which version matches your materials best.

You are welcome to use my photos for marketing purposes.

Feel free to join my Facebook group for tutorials and assembly instructions: https://www.facebook.com/groups/313542606438023/

With so many new lasers on the market, I cannot provide settings as I do not want to provide incorrect settings that can damage your machine or product. Each Glowforge runs at different speeds and also operate differently for each material. I cannot trouble shoot hardware, as I do not want to be responsible for damaging your machine by giving you the wrong advice. I can tell you I normally use 1/8” MDF on my projects on medium draft board setting if that helps :)

I used chalk paint and distressing ink pads on the one in the photo and I choose to paint after cutting, You may choose to paint first and mask. You can also use natural wood. I have a video tutorial on how to assemble this should you need help. It is posted in my Facebook group.

By purchasing this file you are granted commercial use. This license is only for the person who purchased the file and cannot be transferred. You may use this file for craft classes, and you may make as many physical items as you’d like. This file is sold AS IS. I cannot alter or personalize this file at this time. Should you want this in a different size, shape, design, that is up to you to make those changes. If you choose to make changes to the file, then you will need software and adjust as needed. You may not then resell the file or claim the newly designed piece as your own. This violates the terms of the license and will be revoked.

Have fun crafting and thank you for stopping by and supporting my small business :)