Waterslide Sizing details

Toddler size 0.2 inches
Child size 0.25 inches
Adult Small size 0.3 inches
Adult size 0.4 inches
Adult large size 0.5 inches
Adult X large size 0.6 inches

Depending on layout of design some my be not as wide.

Can do custom size. Message me the size you are looking for.

1. Paint nails in the color of your choice. White work best to give you the full color effect.
2. Cut out the decals and trim to fit your nails.
3. Place the decal in water for 15 to 30 seconds.
4. Slide off the backing paper and place decal on nail.
5. Once you are happy with the position dab the excess water off.
6. Allow to dry thoroughly & seal with a good quality clear top coat.

You need to seal them with a clear polish top coat; if you don't seal the edges they will come off quickly. I recommend applying 2-3 coats of a good quality top coat, making sure to cover the edges. Then every few days re-apply a clear top coat to make them last longer.

For international shipments. Please purchase at your own risk as we cannot provide refund for packages that do not arrive.

Process time is 2 to 6 business days. Then you have shipping time that depend on the shipping method you choose. Custom Orders will take longer up to 14 business days before shipping.


Holiday Process time is 3 to 10 business days and it start Oct 15. Custom Orders will take longer up to 21 business days before shipping.

You still have shipping time after process time and that depend on the shipping you pick. We have no control of USPS shipping time.

Yes nail polish strips are made with real nail polish. But there other materials in them also.
There is a top coat, color layer, base coat and a backing. The backing is not nail polish.


The backing is made like a adhesive sticker.

Removing the entire decal from the backing to apply to your nail: Be careful when doing this as it can cause your decal to curl onto itself. Once your adhesive is activated and your decal is ready to be applied, place the backing of the decal flush with your nail and slide it from behind the decal allowing the decal to fall straight onto your nail from the backing.

Over working your decal: Over working your waterslide decal can cause cracking and tearing. To avoid overworking it has placement lined up before sliding it off the backing onto the nail. You will also want to make sure that your nail has some water on it to allow the decal to glide on smoothly with curling.

You have left your decal in the water for too long and it has broken the decal down. This means it will break easily.

Decals are also very delicate you must ensure you are being extremely gentle when applying and mindful of how you use your tweezers. Be conscious of the 10-15 second time frame to be in the water over exposure to the water will result in the decal breaking down /bleeding. Remember to cut your decal out as close as you can to the design to ensure the decal sits flush to the nail.

You have not sealed your decal good. You need to seal them well with a good quality topcoat, Making sure you cover the whole nail. The topcoat would need to come off before the decal will. Not all brand of topcoat will work.

You need to apply a high tacky finish base coat or gel for your decal to grip.

You are most likely leaving your decal in water for too long, it only needs 10-15 seconds. If you leave it too long the water will make your decal bleed.

You have not removed the water correctly when applying. Refer to point 5 - 7 from the application to avoid this.