Mini Cabinet for Wall, Pegboard, or Ryobi Link Wall Rails holds USB Lithium batteries, keychains, lanyards, bits, pencils, and more

This small, sturdy cabinet holds a variety of items and is designed to be similar to Ryobi wall cabinets. It has a top shelf, inner storage area with sliding door, 3 hooks/pegs for hanging items such as keys and lanyards, and 2 slots to hold Ryobi USB Lithium batteries. It can hold keys, cell phones, batteries, headphones, bit cases, screws, pencils, markers, tape measure, small tools, etc. and has pegboard sides for more attachments. It can be mounted in a variety of ways including screws to the wall, pegboard*, and Ryobi Link Wall Rails.

Details: (see photos for examples & notes)
- top shelf is slightly recessed and beveled to securely hold your cell phone, small items, fasteners, etc.
- the green door slides forward and drops down concealing the interior and has a front lip to easily lift it back up
- interior has enough dimensions to hold a small Ryobi 18v One+ Battery (P102)
- hooks/pegs for hanging items (keys, lanyards, etc.) are in the shape of a Ryobi One+ battery stem with a hexagonal hole to also hold bits, screwdrivers, and/or pencils
- holds 2 Ryobi USB Lithium batteries (that can be plugged in while stored from underneath) or these slots can be used for larger items such as highlighters or markers
- sides have pegboard holes at 1/2" on center (thus also at 1") and hold common wire tool holders for pegboard*
- the top tray is designed to be exactly the width of 3 Ryobi Bits Case holders
- sides have a large hole near the back to run a cable or wire to plug into something inside
- the height exactly matches and aligns with 1 Ryobi Link Wall Rail
- the bracket for mounting to Ryobi Link Wall Rails comes attached underneath. If using for Link Wall Rails, unscrew with a small Phillips-head screwdriver (not included), reverse the bracket, and reattach with the same screws & nuts in 3 different holes. The bracket has a slotted hole for an additional set screw (not included) to more securely attached the Ryobi Link Wall Rails.

The following is included:
- 1 black mini cabinet box
- 1 green mini cabinet sliding door
- 1 black bracket for Link Wall Rails (mounts underneath if not used)
- 3 screws and nuts to hold the Ryobi Link Wall Rail bracket (in either position)
- 6 pegs (3 curved, 3 straight) that store recessed on the back if not used. Only 4 are needed and 2 are extra. To use, pry out with a small flat screwdriver. 2 curved pegs go in the top pointing up and 2 straight pegs go in the bottom holes. For the strongest permanent connections, superglue into place.

There are 2 add-on options for additional functionality
a. 14-battery rack to hold additional Ryobi USB Lithium Batteries
b. 6-tray shelf and 6 green trays for small items. Each tray's interior dimensions are 2.3" wide x 3.5" long x 0.9" high (60mm x 90mm x 23mm).

NO tools nor batteries are included and shown in photos for reference only.

Dimensions:
Exterior: 7" x 7" x 4.5" (176mm x 174mm x 113mm)
Interior: 6" x 3.8" x 3.6" (152mm x 99mm x 92mm)
Top Shelf beveled area: 6.1" x 3.3" (157mm x 85mm)

It is 3D-printed in black & green PLA plastic.

* Note that there are many different types of pegboard and some may not work. This was designed to work on 1/8" thick Masonite pegboard with holes at 1" (25.4mm) on center.

It is 3D-printed in PLA plastic. It is 4.7" x 4" x 3.5" (118mm x 103mm x 90mm).
This item is 3D Printed in PLA plastic which is made from a renewable resource. It’s biodegradable and eco-friendly. These are lightweight and due to the printing process, there may be some imperfections. 3D Printing involves the heating and depositing of material on a flat board one layer at a time. Each model is custom printed to order. We print these as a hobby and are not a large scale manufacturer. They are all printed in the USA.