• May include: A red metal gear box with the text "Hilux 1/160 TRX4M: 155 Rear Shaft 40" written on it. There are two black plastic parts, a black plastic piece with a metal servo, and a clear plastic container with metal drill bits.
  • May include: A close-up of two black and orange electric motors. The motor on the left is labeled "TITAN 180 67T REVERSE ROTATION". The motor on the right is connected to a red and black gear box.
  • May include: A red and orange RC car chassis with black wheels and a black body. The car is upside down and the underside of the chassis is visible. The car is on a white surface with a grid pattern.
  • May include: Two disassembled RC car motors, one black with a red and silver gear, and one red with a black gear. The black motor has a red, yellow, and black wire attached. The red motor has a black wire attached. The motors are on a white surface with handwritten notes about wheelbase and gear ratios.
  • May include: A close-up of a set of black plastic parts for a 3D printed RC car. The parts are labeled "Oppai Factory" and include instructions for assembly. The parts include a transmission, side mounting plates, and screws.
  • May include: A clear plastic bag containing black 3D printed car parts labeled "Anime Slaps" and "3D Printed Parts". The bag is labeled "Oppai Factory Anime Slaps and RC Car Parts".
  • May include: A red metal gear box with the text "Hilux 1/160 TRX4M: 155 Rear Shaft 40" written on it. There are two black plastic parts, a black plastic piece with a metal servo, and a clear plastic container with metal drill bits.
  • May include: A close-up of two black and orange electric motors. The motor on the left is labeled "TITAN 180 67T REVERSE ROTATION". The motor on the right is connected to a red and black gear box.
  • May include: A red and orange RC car chassis with black wheels and a black body. The car is upside down and the underside of the chassis is visible. The car is on a white surface with a grid pattern.
  • May include: Two disassembled RC car motors, one black with a red and silver gear, and one red with a black gear. The black motor has a red, yellow, and black wire attached. The red motor has a black wire attached. The motors are on a white surface with handwritten notes about wheelbase and gear ratios.
  • May include: A close-up of a set of black plastic parts for a 3D printed RC car. The parts are labeled "Oppai Factory" and include instructions for assembly. The parts include a transmission, side mounting plates, and screws.
  • May include: A clear plastic bag containing black 3D printed car parts labeled "Anime Slaps" and "3D Printed Parts". The bag is labeled "Oppai Factory Anime Slaps and RC Car Parts".
Report this item to Etsy

Oppai Factory 2-Speed High Clearance Transmission Plate for TRX4m

OppaiFactory  
5 out of 5 stars

Item highlights

  • Made to order
View more

Item review

Why this review appears

All reviews are from verified buyers. This review is shown automatically based on factors like recency, whether it includes comments, your chosen language, and whether the rating reflects the typical experience with the shop.

“I have loved every kit that I have purchased from Oppai. Low pro skids rock. I have the ir40 and 60 lcg frames and love them. They crawl better and the stance is noice!”

Derek

Feb 13, 2025

View all

Price:$17.99

You can only make an offer when buying a single item

Shipping & return policies
  • Get it by
    Nov 12-19
  • Returns & exchanges
    Accepted within 30 days
  • Cost to ship
    $6.82 to United States, 43215.

Reviews for this item

5.0

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience.

(7 reviews)

5.0 Item quality
4.8 Shipping
5.0 Customer service
100% Buyers recommend
Filter by category
5 out of 5 stars 5 This item

Jeremy Apr 2, 2025

Awesome product. This guy is brilliant. Would recommend and will buy again.

Jeremy Apr 2, 2025

5 out of 5 stars 5 This item

Derek Feb 13, 2025

I have loved every kit that I have purchased from Oppai. Low pro skids rock. I have the ir40 and 60 lcg frames and love them. They crawl better and the stance is noice!

Derek Feb 13, 2025

5 out of 5 stars 5 This item

Bubba Oct 23, 2024

Very nice product for the money you spend, clear instructions included with the products. Would highly recommend any of their products.

Bubba Oct 23, 2024

5 out of 5 stars 5 This item

Roger Aug 20, 2024

Fit perfectly and shipped fast

Roger Aug 20, 2024

Photos from reviews

Seller's description

Specifications

May include: A red metal gear box with the text "Hilux 1/160 TRX4M: 155 Rear Shaft 40" written on it. There are two black plastic parts, a black plastic piece with a metal servo, and a clear plastic container with metal drill bits.

TRX4M High Clearance Transmission Plate.

**For FCX24 2-Speed only**

Juat as it sounds, this is a custom designed transmission plate that allows you to mount it 7mm higher than factory so it sits flush with stock rails, LCG kit, or chassis kit (Like Mues Ripper or Injora Tarantula).

It also allows you to attach all the links into the plate before mounting rails or a chassis kit, making assembly and maintenance MUCH easier.

Works with all factory hardware and comes with extra SS hardware for the new mounting system.

**This plate is different from the standard plate as it is fot the FCX24/ 18 2-speed. This is JUST the plate for those you have a donor FCX and do not need the other components to adapt one to fit a TRX4m.

Note**
Since this is a custom mod style plate and deviates from the original 4m design, some modifications to the frame may be needed to clear the front upper link screws depending on the shape of the frame. The sure fire way to clear this issue without having to modify the frame is to cut the front 2 ears off the plate and let the screw head to be recessed inside the plate. This modifies the plate, but does not harm the structural integrity of the part, as there is more then enough material to carry the screw and link on the inside of the plate.



Free Lifetime Replacements:

I understand that 3d parts have can be more susceptible to breaks over metal or injected nylon parts, so for as long as I am business I offer free lifetime replacements of any parts that break for any reason. Simply cover the shipping, and I can ship out any replacement part or parts you need to make your rig whole again. If you are international, I understand shipping costs more so I will give you multiple sets of whichever part was broken to save you if you have another accident in the future. All of my products evolve over time if I find a better method or update I can do to improve them. If you do have a break on an older ver. of the part, then I will supersede you to the current ver. for only the cost of shipping.

Disclaimer:

This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts.

Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child.

Due to a rather insane review I received, I need to state this, and be sure anyone else so inept HAD the opportunity to read this...

Delivery details and policies

  • Get it by
    Nov 12-19
  • Returns and exchanges
    Accepted within 30 days
  • Ships from
    Sedro Woolley, WA
  • Cost to ship
    $6.82 to United States, 43215

    There was a problem calculating your shipping. Please try again.

Shop with confidence
Star Seller

This seller consistently earned 5-star reviews, shipped orders on time, and replied quickly to messages.

Etsy Purchase Protection

If something goes wrong with an order, we've got your back on all eligible purchases. View program terms

Climate investments

Etsy supports climate solutions, from electric delivery trucks to carbon offsets for every delivery. View how

Meet your seller

OppaiFactory
Oppai Factory
OppaiFactory ·

Sedro-Woolley, Washington

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience. 4.9
·
5.9k sales
·
3 years on Etsy

Usually responds in a few hours

Smooth shipping Has a history of shipping on time with tracking.

Speedy replies Has a history of replying to messages quickly.

Rave reviews Average review rating is 4.8 or higher.

Disclaimer: As with all children's products, adult supervision is required. Products that contain small parts may pose a choking hazard and should not be used by children under 3. Sellers are responsible for following applicable laws and regulations, including posting items with accurate labeling and warnings. Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Always read labels, warnings, directions and other information provided with the product before using it. If you have any questions, message the seller. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more

Explore related searches

Hobbyplus Cr18

Listed on Oct 28, 2026
36 favorites
Homepage Toys & Games Toys Push & Pull Toys Vehicles

Looking for more? Find it on Etsy