BEST Glaze for Glass Pendants. Glamour Seal adhesive for Glass Pendants is safe for ink jet prints. 16 oz Pint.

Never run out of Glamour Seal with this 16 oz refill bottle!

Please follow my FREE tutorial which was written for use with my products. Copy and paste this link to your browser: http://www.anniehowes.com/Glass-Photo-Pendant.html

+ + + + + + + + + + + + + + + + + + + + + +
>>>>>> COLD WEATHER WARNING: <<<<<<<

- During certain times of the year, if a heat pack isn't purchased, I will hold your order until nighttime temps are above freezing.
- During winter months (November through March), nighttime temps are consistently well below freezing, and your order will not ship without the purchase of a heat pack.
- If the Heat pack option is not available, purchase with confidence that I will ship your order based on temperature conditions in my area that week.
+ + + + + + + + + + + + + + + + + + + + + +

Glamour Seal is not a top coat or finishing coat for making Scrabble tiles or similar projects. For that you will want Glamour Glaze or Luxe Resin.

Glamour Seal is not waterproof.

16 ounce refill bottle has a wide mouth and does not include an applicator tip. Easy-to-use size. Recap for extended use. Cleans up with water.

+ + + + + + + + + + + + + + + + + + + + + +
WHAT YOU'LL RECEIVE
+ + + + + + + + + + + + + + + + + + + + + +

16 ounce refill bottle does not include an applicator tip.

LISTING IS FOR::
- 1 bottle of Glamour Seal, 16 ounces

* Glass, pendant tray, and chain sold separately.

+ + + + + + + + + + + + + + + + + + + + + +
TUTORIAL AND INFORMATION ON HOW TO MAKE GLASS PHOTO PENDANTS
+ + + + + + + + + + + + + + + + + + + + + +

Please use my FREE INSTRUCTIONS + VIDEO available at www.anniehowes.com when using this product.
Failure to follow my easy instructions may result in less than satisfactory results. I am not responsible for results if you do not follow my instructions.

Use prints from any printer, including ink jet prints. Do NOT use photo paper. Do NOT use glossy paper. For more information on this please read my FULL FREE TUTORIAL on my website www.anniehowes.com

Step 1: Attach the glass to the paper using Glamour Seal and allow to dry.
Step 2: Glue into the pendant tray using Glamour Seal and let dry.
Step 3: Throw your hands up in the air...you're finished!

>>> THE BEST PAPER TO USE FOR INKJET PRINTS:
Paper Recommendation for INK JET printers: Epson Ultra Premium Presentation Paper (matte) 51 lb, S041341

+ + + + + + + + + + + + + + + + + + + + + +
GLAMOUR SEAL INSTRUCTIONS
+ + + + + + + + + + + + + + + + + + + + + +

Glamour Seal can be used on many paper types. When using your own prints, you can print from either an inkjet printer or a color laser printer. The paper you choose is important, so please read the following carefully.

Glamour Seal is best used on matte paper, 90# or cover weight. Not recommended for regular printer paper, glossy paper, and lab prints, such as those provided by photo processing centers. Glamour Seal works great on decorative papers such as Chiyogami, Italian, and scrapbook papers. The paper with the best results when I tested using a Canon inkjet printer was the Epson Presentation Paper (matte).

PAPER EXCEPTION: If you are using Glamour Seal to seal inkjet prints that will not be pressed to glass (ie. Bottle caps that will be coated with Luxe Resin, or in other projects that will use Luxe resin, such as pendant trays, then glossy paper is an acceptable paper to use.

INKJET EXCEPTION: If your inkjet printer uses a combination of pigment black and dye color inks, Glamour Seal may not work as promised. Please check your printer before purchasing and be aware that Glamour Seal may not be compatible with your printer. We are not responsible for incompatibilities with printers that use pigment + dye based inks.

When making GLASS PENDANTS, brush Glamour Seal onto the glass using a paint brush and coat the surface entirely. Press to paper and hold firmly for a few seconds until the Glamour Seal starts to bind. Use this time to work out any trapped air between the glass and paper. Allow to dry paper side up for at least 5 minutes before proceeding to the next step.

Once the first application of Glamour Seal is dry, then apply a small amount to the back of the paper and press into the pendant tray.

When using with LUXE RESIN, apply a small amount to the back of the paper and press into the pendant tray. Allow to dry at least 30 minutes before proceeding to the next step.

When the first application is thoroughly dry, apply a generous coating to the exposed paper. Make sure the entire paper is covered paying close attention to the edges of the paper. You are creating a barrier between the paper and the Luxe resin. Failing to do so will result in dark spots which is where the resin came into direct contact with the paper. If you are unsure if one coat will be sufficient, then apply a second coat after the first coat is dry.

+ + + + + + + + + + + + + + + + + + + + + +
TROUBLESHOOTING:
+ + + + + + + + + + + + + + + + + + + + + +

Problem: The Glamour Seal is still white and drying slowly.

Answer 1: Glamour Seal needs a different paper type. Glamour Seal is best used on matte paper, 90# or cover weight. Not recommended for regular printer paper, glossy paper, and lab prints, such as those provided by photo processing centers. Glamour Seal works great on decorative papers such as Chiyogami, Italian, and scrapbook papers. The paper with the best results when I tested using a Canon inkjet printer was the Epson Ultra Premium Presentation Paper (matte) which can be used with all inkjet printers. The exception to this is when sealing paper prior to using Luxe Resin, then glossy paper is OK.

Answer 2: Glamour Seal needed more time to dry before moving to the next step. You must allow the product to dry thoroughly otherwise you lengthen the drying time significantly.

Problem: The ink from my inkjet print is smearing.

Answer 1: This is possibly because the ink was not dry to begin with. The prints from inkjet printers must dry before using them in any application. If the ink smears when you touch it, allow it to dry until the ink does not smear to the touch. Please check with your printer manufacturer to determine the drying time of the prints.

Answer 2: Discoloration can occur if your inkjet printer uses a combination of black pigment based ink and color dye based inks. Please see the INKJET EXCEPTION in the product description.

Problem: Excessive bubbles/frothing is occurring.

Answer: This is typically caused by glossy photo papers that are marketed as "fast-drying" or "quick-drying", most commonly found on glossy papers. These papers are coated with a film that bubbles profusely when in contact with any liquid. Avoid using these papers.

Problem: Cloudiness occurs after gluing into the setting.

Answer: Check your paper type. If you used regular printer paper, this will clear up, but may take a day to do so. It can also be caused by using photo papers which prevent the adhesive from drying. If neither of these apply, then it's probably caused by using too much Glamour Seal. A little bit goes a long way, so use less next time. Meanwhile, give it a little longer to dry and they should clear up.

* * *

Use of our products with any other products or instructions voids any guarantees we make. Please use our free tutorials located at www.anniehowes.com and refer to our page dedicated to your success when using Glamour Seal: http://www.anniehowes.com/Glamour-Seal.html