Oppai Factory "Long Wheelbase" High Clearance Transmission Plate for TRX4m (FXC24 2-Speed Trans)

"Long Wheelbase" High Clearance Transmission Plate for TRX4m. (FCX24 2-Speed Trans)

Just as it sounds, this is a custom designed transmission plate that allows you to mount it 7mm higher than factory so it sits flush with, LCG kit, or chassis kit (Like Meus Ripper or Injora Tarantula).

This is a special "Long Stance" plate that mimics the rear suspension linkage geometry on BOTH ends lf the plate. This not only stretches the stance or your rig out 22mm, but also puts you on x8 68mm links. This allows far greater twist from the front suspension.

Note**
Since this is a custom mod style plate and deviates from the original 4m design, some modifications to the frame may be needed to clear the front upper link screws depending on the shape of the frame. The sure fire way to clear this issue without having to modify the frame is to cut the front 2 ears off the plate and let the screw head to be recessed inside the plate. This modifies the plate, but does not harm the structural integrity of the part, as there is more then enough material to carry the screw and link on the inside of the plate.

**Please note:

This plate requires custom links or ordering 2 sets of links and driveshafts to construct.

It also allows you to attach all the links into the plate before mounting rails or a chassis kit, making assembly and maintenance MUCH easier.

Works with all factory hardware and comes with extra SS hardware for the new mounting system.


Free Lifetime Replacements:

I understand that 3d parts have can be more susceptible to breaks over metal or injected nylon parts, so for as long as I am business I offer free lifetime replacements of any parts that break for any reason. Simply cover the shipping, and I can ship out any replacement part or parts you need to make your rig whole again. If you are international, I understand shipping costs more so I will give you multiple sets of whichever part was broken to save you if you have another accident in the future. All of my products evolve over time if I find a better method or update I can do to improve them. If you do have a break on an older ver. of the part, then I will supersede you to the current ver. for only the cost of shipping.
Disclaimer:

This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts.

Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child.

Due to a rather insane review I received, I need to state this, and be sure anyone else so inept HAD the opportunity to read this...