Car Showroom Laser Cut Files: 1/64 Diecast Display Building

Build a 1:64 car showroom with a roof that opens upward to access the display.

This is a digital download for making the design yourself. No physical item, plywood or hardware is shipped.

WHAT YOU RECEIVE
- SVG, DXF design files
- PDF assembly instructions

PROJECT DETAILS
Finished size with 3 mm material: 276 × 276 × 127 mm (width × length × height). Largest part: 276 mm.
Cutting files for 3 mm and 1/8 inch plywood and a PDF assembly guide are included.
The cars shown are display examples; no physical cars or building are supplied.

BEFORE YOU CUT
Check that your laser software can open the supplied formats and that the layout fits your work area. Use the supplied version that matches your actual material thickness.

If you uniformly enlarge a slotted model, its slots and tabs enlarge too, so proportionally thicker plywood is required. For example, scaling a 3 mm design to 150% requires approximately 4.5 mm actual plywood thickness. Scale all parts equally; the finished dimensions also change. Measure your material and test the fit and kerf before cutting the full project. Message me if you need help with sizing.

USAGE TERMS
Contact 21CNCStudio to discuss permission before commercial use. The digital files may not be distributed without the author's permission.