TRIPLE STAND for 4MS Pod 34x / 64x - Powered - 206075 Degrees - st3nD - 3d Printed

TRIPLE STAND
for your
- 4ms Pod34X (Powered / Unpowered)
- 4ms Pod64X (Powered / Unpowered)
(Not compatible with other 4ms Pods or other devices. CHECK YOUR POD TYPE carefully before buying!)
The stand holds THREE of your favourite 4ms Pods in ONE ergonomic setup.
About our 4ms Pod st3nD range: mix and match your Pods and build small yet complex, unified systems with the help of our stands. Just click them into place and enjoy the comfort, ergonomics, and functionality of custom-built eurorack cases - but with the added advantage that now you can replace not just individual modules, but entire tiers! This is an affordable, smart, and practical solution. Despite its modularity, it remains just as stable, reliable, and wobble-free as any other eurorack case. And you can easily move the whole unit with just one hand!
Choose the right size, and you're good to go!
This 20°, 60° and 75° TRIPLE STAND with rubber pads for your 4ms Pod34X and 4ms Pod64X is a completely stable and wobble-free solution for tilting your device, providing better visual accessibility and easier reach on your desktop, even from a distance. The Pod in the middle would need a chain power cable coming from either the upper or lower one.
Our stands are very compact and lightweight, making them extremely easy to carry - a perfect companion for taking it with you anywhere, whether it's a live gig in a club or a private session in the woods. ;)
Important! Do not slide the stands from the sides. Follow these two easy installation steps:
1) First, hook the bottom part of the leg onto the Pod's edge. Then, tilt the leg backward to position the device into the stand while pulling back the back clamp.
2) Once the top of the clamp is over the edge, release it to fasten the leg securely.
Repeat these steps for the other leg. You will receive two identical pieces, so you don’t need to worry about which side goes where.
That’s it! Happy knobbing!
STAND TYPE: EasyLock - CLICK
This is a type of stand which developed for devices where the shape of the casing does not allow for side-sliding of the legs, such as with a rim or side panel. These stands can be installed according to the specific instructions in the designated order to achieve the results shown in the gallery pictures. Do not attempt to slide this stand in from the side or install it in any other sequence than described in these instructions.
Advantages:
Portability: It is portable, easy to set up, and ready to use immediately. The design ensures a snug fit and optimized use for each device.
Stability: Very stable! The stand is built to be secure on desks, featuring rubber pads to prevent slipping and wobbling.
Ease of Use: You can read and handle your device better from a distance.
Cohesiveness: Together with these legs, you can manage your device as a cohesive system without worrying about it falling apart.
Cable Management: A little elevation ensures you can organize your cables under the device, making placement more flexible. Unlike other universal laptop or closed stands, the elevated section between the legs provides cable management without needing to route around the device, which is an extremely convenient feature.
No Rear Connecting Rod: Just two pieces, nothing else!
Live Gig Friendly: You can bring it to your live gig – forget the heavy laptop stands and weird unstable things

Disadvantages:
Decksaver Compatibility: Limited compatibility with Decksaver (if it exists for this device) or other hard covers because of the “bracket shape”. Solution: we make hand-tailored, waterproof, simple black DustCoverPro dust covers for most of the gears. Check availability in our shop!

____________________________________
ABOUT st3nD DESKTOP STANDS:
All our products are 3D printed, followed by post-procession by hand for each item individually. Our goal is to develop and manufacture high-quality desktop stands with the following features:
Easy installation without glue, screws, or any tools.
Stable and non-slip design, free of wobbling.
Easily manage the stand and your device together as a cohesive system, moving them with one hand.
The stand reduces the device’s footprint on your workspace, or at least doesn’t increase it.
Lightweight yet strong.
No middle rods or stabilizers needed (EasyLock stands).
Extremely portable, perfect for taking to live gigs.

When designing and making stands, I keep these considerations in mind: I manufacture these stands one by one, ensuring that each piece is handmade and unique. This approach allows me to focus on high quality, although it means the stands may not be as inexpensive as mass-produced products. My goal is to lower prices as much as possible to save you money while maintaining high quality.
Customer Satisfaction and Quality Guarantee:
Since 2020, our continuously expanding product range and thousands of excellent reviews across various platforms guarantee that you won’t be disappointed! My mission is to enhance your creative process with better ergonomics, making it more enjoyable and productive. If you encounter any issues, please contact us, and we will resolve any problems to ensure your complete satisfaction. Our 3D printed stands are designed to provide long-lasting support for your devices, ensuring you can focus on your work or performance without any disruptions.
IMPORTANT:
The devices and other elements shown in the images are for illustration purposes only and are not included with the stands.
Shipping time depends on the preparation time, which we strive to minimize, as well as the distance and conditions of your country, and the shipping service or upgrades selected at checkout. For all our shipping services, we will provide you with a tracking number. If your package does not arrive within the estimated shipping time, please let us know, and we will investigate the issue to see what can be done.
By choosing st3nD, you are investing in a product that combines innovation with practicality. Our stands are not just tools; they are designed to seamlessly integrate into your workflow, enhancing your overall experience. Order your 3D printed desktop stand today and see the difference for yourself!
If you can’t find something you’re looking for, feel free to ask. We have overcome many unique demands, so it might just be that we already have a solution in our secret drawer. ;)