Toughened Glass Splash Guard for Kitchen & Bathroom Sinks to protect your worktops and grout

Protect your worktop and grout with this minimal sleek looking toughened glass splash screen for kitchen or bathroom sinks.

The glass is toughened to the British Standard EN12150, up to 6 times stronger than untreated glass, providing increased resistance against impacts and thermal stresses. (Please be aware: Whilst the surface of the glass is significantly stronger, any sharp impact to the edges could cause it to shatter.)

The Sink Guard rests against your window sill / wall and tap or sink.

It has a push fit rubber plastic seal to ensure a watertight seal, effectively preventing water leakage and keeping your kitchen worktop or grout dry.

The seal can be easily removed and refitted for easy cleaning.

SIZES AND FITMENT
Please measure your sink to ensure you choose the right size before buying. I recommend a length slightly shorter than the full length of your sink as any overlap will cause water to leak over the edges and onto your worktop.

The toughened glass panel is available in a few lengths:

- 1000mm (length) by 150mm (high) and 6mm (thick); or
- 900mm (length) by 150mm (high) and 6mm (thick); or
- 800mm (length) by 150mm (high) and 6mm (thick); or
- 700mm (length) by 150mm (high) and 6mm (thick); or
- 600mm (length) by 150mm (high) and 6mm (thick); or
- 500mm (length) by 150mm (high) and 6mm (thick); or
- 400mm (length) by 150mm (high) and 6mm (thick).

(If you’re after a custom length and height, please get in touch with what size you need in millimetres and I’ll do my best to give you a quote.)

If you purchase a Replacement Seal Only then please state what length you need in the notes with your order.

If your tap is located too deeply into the sink and cannot be used to rest the glass panel, then please message me and I can send you some small suction pads to stick onto the sink / sink edge which should hopefully hold it in place (please be aware these suction pads only work on smooth surfaces and may need to be glued down with a drop of glue).

POSTAGE and PACKAGING
The glass panel will be wrapped in cardboard (sometimes recycled) and posted using Evri's standard tracked delivery service which usually takes 2-5 working days. You will be provided with a tracking details.

CARE INSTRUCTIONS
Dry the glass splash screen with a microfibre cloth when it is wet. Clean with glass cleaner and microfibre cloth.

Remove and wipe the seal once every 2 weeks to prevent mould or hard water deposits from forming.