Seadoo Spark/Trixx Fishing Rod Holder

Seadoo Spark/Trixx fishing rod holder. Fits 2014-2023. 3D printed out of PETG and includes bungie cord. The pocket for the handle of the pole is 7.5 inches deep and 1.2 inches wide. Utilizes factory bolt locations so no need to drill into the hull. This is a bolt on option. See the pictures for an installation write up. I’ve spent hours on the lake with this setup and had no issues at all. If you have heavy weights or lures, remove them before riding. I also do not advise to have a fish on the line and the rod in the holder (depending on what size you are catching, anything over 2lbs I would advise against to avoid damaging the threads on the hull). I use this to just transport the pole from spot to spot and I hold the rod. I will not be accepting returns on these because installation can be easily messed up, resulting in breaking the tab off. I am not responsible for anyone stripping the plastic hull if they over tighten the screws. Put the screws back into the ones you remove to avoid water getting in the hull


Please note these products are made using a 3D Printer. Although 3D Printers are high precision machines, minor defects can occur from print to print. This may include visible layer lines, minor pores, stringing or minor protrusions in the print.