Bambu Lab AMS Desiccant Container _Air Max 2 (Not for AMS 2 Pro)(Digital Download Only)

Bambu Lab AMS Desiccant Container _Air Max 2 (Not For AMS 2 Pro)
Maximizing the exposure of desiccant to AMS internal air, purposefully blends functional attributes with a dash of visual finesse, keeps the filaments dry, and elevates the sense of craftmanship in your AMS & workshop.

The volume of desiccant Air Max 2 carries may not be the largest among the others but is a bit easier to load and unload due to its much larger opening at the top.

The corner box is cut to adapt the interior of the AMS, so it looks cohered with the rest of the line when placed inside the AMS. Please refer to the pictures for suggested placement.

Hygrometer
One thing I have encountered is that the original hygrometer Amazon link I purchased from is no longer available. Others have a major difference at the back of the hygrometer where the housing latch corresponds to the front display layout.

If you already have one with vertical latched then use the file “Air Max 2_ With Hygrometer_S.ID” which is my original build for the layout.

The “Air Max 2_ With Hygrometer_V2_S.ID” is a modified version of the 1st one to fit in the diagonal latched hygrometer.

You can get the hygrometer from Amazon here. ( had bought them and tested )

Diagonal latched:

https://www.amazon.com/dp/B0CXHV22GD?psc=1&ref=ppx_yo2ov_dt_b_product_details



Vertical latched:

BLK-

https://www.amazon.com/dp/B0CJRCY91M?ref=ppx_yo2ov_dt_b_product_details&th=1

White –

https://www.amazon.com/dp/B09B4Z4BW9?psc=1&ref=ppx_yo2ov_dt_b_product_details



Print Setting
I printed all the body parts with default without support seems to be fine except the print result could use a bit higher resolution for a smoother surface. For the caps I suggest to print in the original angle with support for best producing the indentation features.

Material : the prints from the picture using PETG (except the corner ones which my PETG stock was out…)
Printer : Bambu Lab X1C, Default PETG setting, 0.4 nozzle / 0.2 mm standard layer height
Support : only use in printing the caps, 2 raft layers, on build plate only
Usage : officially only for Bambu Lab AMS, and …I put one in my air-tight camera box …


Enjoy !!!

With your support, I can invest more time in many lined-up projects that boost satisfaction with 3D printing and hopefully many things later.

Cheers!!!