Tablet holder made of solid oak wood, wall mounting with or without charging function

Tablet holder for wall mounting with or without charging function.
Wood type: Solid oak, oiled.

Our favorite tablet mount. We produce this model in slightly larger quantities, so we can offer it at a slightly lower price.

The charging plug is height-adjustable, allowing the holder to be used for various tablets.
Ideal for smart home control. The tablet can be easily pulled out from the side when needed. Simply slide it in to charge.
Image shows iPad Pro 250 x 174 mm

The tablet holder can be mounted both lying down and standing up.
The USB socket is not included in the scope of delivery.
The charging cable can also be routed out the side or bottom and plugged in externally.

For variants: "Lightning" or "USB-C" the charging cables, the two adapters and the adapter holder
included in delivery.

The cables typically have a USB-A connector on the power supply side. In the USB-C to USB-C version, both ends are equipped with a USB-C connector.
You can use, for example, the following power supply.
TNT003 Flush-mounted PoE power supply to USB-C Ethernet splitter up to 25 W

https://www.amazon.de/dp/B0CSP89V9F?ref=cm_sw_r_cso_cp_apan_dp_303T0Z5WH113PJAS0CAG&ref_=cm_sw_r_cso_cp_apan_dp_303T0Z5WH113PJAS0CAG&social_share=cm_sw_r_cso_cp_apan_dp_303T0Z5WH113PJAS0CAG

Because the charging plug adapters are specially milled, only our cables can be used.
The tablet and USB socket shown in the image are not included in the scope of delivery.

Width: 275 mm
Height: 179 mm
Total depth: 32 mm

Maximum tablet thickness: 8.6 mm
Max. tablet height: 230 mm (assuming the charging plug is in the center)
Maximum pin diameter: 9.3 mm, minimum pin length: 140 mm
Minimum distance from the center of the charging plug to the bottom edge of the tablet: 65 mm
(except for Amazon Fire HD 10, where the plug adapter is mirrored and the cable
(goes upwards)
Maximum distance from the center of the charging plug to the bottom edge of the tablet: 115 mm

Only tablets with the charging port on the right can be used.
To remove, simply pull out to the left.
Installation: The base plate is mounted to the wall using four screws. Four screws and four wall anchors are included in the delivery. Two 10 mm spacers are also included. These are necessary when using a built-in USB socket (see photo) to prevent the cable from kinking.
The top panel is attached to the base plate using dowels.
Base plate and top plate are each made of the same type of wood.
The distance between the tablet mount and the wall is 13 mm (the thickness of the base plate without the wall anchors). If you have a standard USB-C or USB-A socket, the base plate can be made slightly thicker. In that case, however, angled connectors will be necessary.

The "without charging" version lacks the charging cable or adapter, as well as the adapter holder. The cutout on the back is present. This allows for upgrading at any time or the use of an existing charging cable. However, you have to plug the device in manually, which is a bit less convenient, but it works.

The Amazon Fire 7, HD8, and HD8 Plus cannot be used. Unfortunately, they are too thick.
The Amazon Fire Max 11 works without any issues. It's only 7.5 mm thick and has the charging port in the center right corner.

Charging cable:
Lightning cable: 30 cm

USB-C cable: Length 50 cm
On the input side, all cables have a standard USB-A connector.
Ideal socket: (as shown in the photo, but not included in delivery:

https://www.amazon.de/Smart-things-S24-Scharge-Unterputz-Netzteil/dp/B07PTRCZZB/ref=sr_1_29?crid=3A2YH288T9RMC&keywords=usb+steckdose+unterputz&qid=1703322546&sprefix=usb+steckdose+unterputz+%2Caps%2C184&sr=8-29


Upon request, the charging cables are also available in a length of 100 cm. This is useful if the power outlet is located outside the vehicle. The cable can be routed out on all four sides. Simply send me a message after ordering, and I will send you the longer cables.
Other cables, such as USB-C or USB-A connectors, are also available in angled versions upon request.