• May include: A disassembled blue and gray Mandalorian armor set. The armor includes a helmet, chest plate, shoulder pads, gauntlets, and a belt.
  • May include: A 3D printed chest piece for cosplay or costume making. The piece is made of two halves, one white and one black, and features a geometric design.
  • May include: Four 3D printed plastic tubes, two blue and two orange. The blue tubes have a black detail on the front.
  • May include: Two hand-drawn circles with measurements in inches. The top circle is 2 7/8 inches wide and 2 3/8 inches tall. The bottom circle is 3.5 inches wide and 3 5/8 inches tall.
  • May include: A set of 3D printed parts for a costume or prop. The parts are blue, orange, and black. The blue part is a long, cylindrical piece with a black detail on the side. The orange part is a shorter, cylindrical piece with a more complex design. The black parts are two small, flat pieces.
  • May include: Two black foam pieces, one with a Mandalorian symbol, are measured with a tape measure. The tape measure reads 2 to 10 inches.
  • May include: Four 3D printed pieces for a costume. Two black pieces are shaped like shin guards, one has a Mandalorian symbol. Two other pieces are curved and shaped like a helmet, one is black and one is red.
  • May include: A 3D printed black face mask with a red plastic buckle and a black elastic strap. The mask is designed to fit over the nose and mouth.
  • May include: A disassembled blue and gray Mandalorian armor set. The armor includes a helmet, chest plate, shoulder pads, gauntlets, and a belt.
  • May include: A 3D printed chest piece for cosplay or costume making. The piece is made of two halves, one white and one black, and features a geometric design.
  • May include: Four 3D printed plastic tubes, two blue and two orange. The blue tubes have a black detail on the front.
  • May include: Two hand-drawn circles with measurements in inches. The top circle is 2 7/8 inches wide and 2 3/8 inches tall. The bottom circle is 3.5 inches wide and 3 5/8 inches tall.
  • May include: A set of 3D printed parts for a costume or prop. The parts are blue, orange, and black. The blue part is a long, cylindrical piece with a black detail on the side. The orange part is a shorter, cylindrical piece with a more complex design. The black parts are two small, flat pieces.
  • May include: Two black foam pieces, one with a Mandalorian symbol, are measured with a tape measure. The tape measure reads 2 to 10 inches.
  • May include: Four 3D printed pieces for a costume. Two black pieces are shaped like shin guards, one has a Mandalorian symbol. Two other pieces are curved and shaped like a helmet, one is black and one is red.
  • May include: A 3D printed black face mask with a red plastic buckle and a black elastic strap. The mask is designed to fit over the nose and mouth.
Report this item to Etsy

Bo Katan Armor! Gauntlets, Shoulder, Chest, Abs, Belt Buckle, Collar pieces, etc..! Physical Item! Cosplay, Costume, Halloween, etc…

HalsCollectables  
5 out of 5 stars

Seller's description

Attention U.S. customers! We take care of everything — shipping, duties, and tariffs are all included, so your package arrives with no hidden costs and no extra steps from you!

If there are any cosplay props, you’re looking for, just message me and I can probably get it printed for you!


In stock!
Ready to ship!

Bo Katan Upper Body Armor!
Abs
Belt buckle
Chest
Collar pieces
Forearms
Hand plates
Head band
Shoulders

If you’re looking for different sizes, or lower body armor, Jetpack, etc. just send me a message. 🙂

Scale : Use the attached image for gauntlet sizing. Simply replicate the wrist and forearm openings on a piece of card board and cut them out. Then check against your wrist and forearm. Remember your hand doesn’t necessarily have to squeeze through these. You can have them assembled by magnets or Velcro, so the two pieces just snap over your arm. If you can fit your hand through the small hole, then you can glue the pieces together if you want for convenience.


Important!
——

Raw Pla print. Will need post processing work if desired. Since all of the accessories are in separate pieces, it makes it very easy to smooth in the main gauntlets. You can use magnets, glue, or Velcro. After painting simply glue all the buttons and details on!


Add a jar of our filler paint for 10.00!

The paint add-on for $10, is a filler paint to help you smooth the print and finish it. (Check the youtube links)
The paint add on for $10 IS NOT colored paint for you to finish painting the model.
The paint add-on for $10 IS NOT for a finished painted model. (I can’t finish this and paint it for you for $10. 🙂)

Youtube demo video link below as well as other videos on my channel.


https://youtu.be/UmstwPX-Vd8


https://youtu.be/3Rb0iyioiUw



——


Made from PLA Filament, plastic made from corn-starch or sugar cane. It is 100% biodegradable, and non-toxic. 3D printed products made with PLA are durable, strong, and make useful items that hold up to real life.

I’ve tried to remove all the printing supports, but it’s possible I missed one.

This is not a completed model. It’s a model kit and comes in pieces.

There are no instructions, but the pieces will only fit together one way, and it’s pretty intuitive. Just be careful you don’t glue it together in the wrong order and find you’re unable to fit the last piece in. Plan it out ahead of time.

PLA models are not the same as resin models. PLA can look just as well on the finished product though. But to achieve the best results requires sanding, crack filling, and a great paint job.



Modelling:

The perfectionist: they will clip, file, and sand every piece. Then glue each piece together filling any gaps with gap fill. Then prime and paint and varnish.

The semi perfectionist: they will file and sand most pieces. Then glue and fill the large gaps. Then prime and paint and varnish.

The painter: they will glue the model together, and fill the large gaps. Then prime and paint and varnish.

View more

Only 1 left and in 4 carts

Price:$70.91+

Please select an option

You can only make an offer when buying a single item

Shipping & return policies
  • Get it by
    Oct 27-Nov 5
  • Exchanges
    Accepted within 30 days
  • Cost to ship
    $20.15 to United States, 43215.

Reviews for this item

What buyers say, summarized by AI: Great quality Fast shipping Helpful seller Looks great As described

5.0

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience.

(21 reviews)

5.0 Item quality
5.0 Shipping
5.0 Customer service
100% Buyers recommend
Filter by category
5 out of 5 stars 5 This item

Nathaniel Oct 21, 2026

Beautiful prints! Cannot wait to purchase more from this seller.

Nathaniel Oct 21, 2026

Response from Hal

Very nice! thanks for the review!

5 out of 5 stars 5 This item

Etsy buyer Jul 29, 2026

fast shipping, good quality print

Etsy buyer Jul 29, 2026

Response from Hal

thank you!

5 out of 5 stars 5 This item

Etsy buyer Jan 7, 2026

Amazing prints, minimal cleanup needed. Gonna order bottom half soon

Etsy buyer Jan 7, 2026

Response from Hal

Enjoy! Thanks so much for the review!

5 out of 5 stars 5 This item

Aarynn Dec 6, 2025

I’ve bought quite a few 3D printed items now and this set is by far the cleanest I’ve ever received. You can barely see the 3D print lines. Honestly I’d say it’s better than the pictures. Overall incredibly happy with this purchase!! Also, I reached out to the seller with a couple questions and they were great about answering them! Will buy from them again some day!

Aarynn Dec 6, 2025

Response from Hal

Thank you SO much! Enjoy!

Photos from reviews

Seller's description

Specifications

May include: A disassembled blue and gray Mandalorian armor set. The armor includes a helmet, chest plate, shoulder pads, gauntlets, and a belt.

Attention U.S. customers! We take care of everything — shipping, duties, and tariffs are all included, so your package arrives with no hidden costs and no extra steps from you!

If there are any cosplay props, you’re looking for, just message me and I can probably get it printed for you!


In stock!
Ready to ship!

Bo Katan Upper Body Armor!
Abs
Belt buckle
Chest
Collar pieces
Forearms
Hand plates
Head band
Shoulders

If you’re looking for different sizes, or lower body armor, Jetpack, etc. just send me a message. 🙂

Scale : Use the attached image for gauntlet sizing. Simply replicate the wrist and forearm openings on a piece of card board and cut them out. Then check against your wrist and forearm. Remember your hand doesn’t necessarily have to squeeze through these. You can have them assembled by magnets or Velcro, so the two pieces just snap over your arm. If you can fit your hand through the small hole, then you can glue the pieces together if you want for convenience.


Important!
——

Raw Pla print. Will need post processing work if desired. Since all of the accessories are in separate pieces, it makes it very easy to smooth in the main gauntlets. You can use magnets, glue, or Velcro. After painting simply glue all the buttons and details on!


Add a jar of our filler paint for 10.00!

The paint add-on for $10, is a filler paint to help you smooth the print and finish it. (Check the youtube links)
The paint add on for $10 IS NOT colored paint for you to finish painting the model.
The paint add-on for $10 IS NOT for a finished painted model. (I can’t finish this and paint it for you for $10. 🙂)

Youtube demo video link below as well as other videos on my channel.


https://youtu.be/UmstwPX-Vd8


https://youtu.be/3Rb0iyioiUw



——


Made from PLA Filament, plastic made from corn-starch or sugar cane. It is 100% biodegradable, and non-toxic. 3D printed products made with PLA are durable, strong, and make useful items that hold up to real life.

I’ve tried to remove all the printing supports, but it’s possible I missed one.

This is not a completed model. It’s a model kit and comes in pieces.

There are no instructions, but the pieces will only fit together one way, and it’s pretty intuitive. Just be careful you don’t glue it together in the wrong order and find you’re unable to fit the last piece in. Plan it out ahead of time.

PLA models are not the same as resin models. PLA can look just as well on the finished product though. But to achieve the best results requires sanding, crack filling, and a great paint job.



Modelling:

The perfectionist: they will clip, file, and sand every piece. Then glue each piece together filling any gaps with gap fill. Then prime and paint and varnish.

The semi perfectionist: they will file and sand most pieces. Then glue and fill the large gaps. Then prime and paint and varnish.

The painter: they will glue the model together, and fill the large gaps. Then prime and paint and varnish.

Delivery details and policies

  • Get it by
    Oct 27-Nov 5
  • Exchanges
    Accepted within 30 days
  • Ships from
    Canada
  • Cost to ship
    $20.15 to United States, 43215

    There was a problem calculating your shipping. Please try again.

Shop with confidence
Star Seller

This seller consistently earned 5-star reviews, shipped orders on time, and replied quickly to messages.

Etsy Purchase Protection

If something goes wrong with an order, we've got your back on all eligible purchases. View program terms

Climate investments

Etsy supports climate solutions, from electric delivery trucks to carbon offsets for every delivery. View how

Meet your seller

Hal
HalsCollectables ·

Saint John, Canada

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience. 4.9
·
2.2k sales
·
3 years on Etsy

Usually responds in a few hours

Smooth shipping Has a history of shipping on time with tracking.

Speedy replies Has a history of replying to messages quickly.

Rave reviews Average review rating is 4.8 or higher.

You may also like

Shoppers with similar taste loved these

Show more
Show more
Listed on Oct 20, 2026
196 favorites
Homepage Clothing

Looking for more? Find it on Etsy