Breaking out Wall Cracks - Wall Decals/Wall Stickers/Home decoration/DYI project/peel and stick/Nursery/kids room/office/car

Transform your space with our high-quality wall vinyl decals, meticulously crafted to add a touch of charm to any room. Our designs blend style and personality, creating a unique ambiance in every space. Easy to apply and remove, these decals are the perfect solution for hassle-free decorating. Explore our diverse collection and elevate your home decor effortlessly.

Our High-Performance Adhesive Vinyl is a 3-mil calendered PVC media with pressure-sensitive and removable adhesive backing for easy installation. The conformability of this film is suitable for long-term flat applications. UV printing enables longer-lasting usage.

FEATURES
* Each decal can be placed however you want!
* Usage: Indoor or Outdoor; Waterproof and UV safe
* Easy to apply and can be easily REMOVABLE without damaging your walls
* Printed on Front side only
* UV Printed 3 Mil Calendered Adhesive
* Vinyl Decals work well with flat surfaces and slightly textured walls, with doors, windows, and furniture too.
* Decals already have an adhesive layer and they are already cut out

FOR BEST RESULTS
This Product Must be used on clean, flat, and smooth surfaces only. ** Not for freshly painted walls - before gluing the decals, it is necessary to let the walls dry for a few weeks (up to 4 weeks), according to the instructions on the paint. -Some panels and decals may require a 2-person installation.

Wipe the wall down with a DRY cloth where the wall decal is to be placed. The vinyl will not stick if there is any dust or dirt on the surface. If the wall area is damp at all it WILL NOT stick properly.

There are many videos online showing you how to place vinyls. Watch at least one so you feel confortable doing this. **The more you remove the vinyl from the wall, the less the glue is going to hold.

Before placing the decal on the wall, pass a squeegee over both sides the transfer tapes or backing paper of the decal to "lossen it up a bit"

Remove one side of the backing paper. Hold the vinyl taut using masking tape over the top transfer tape, and use a squeegee to smooth the decal onto the wall, starting from the center and moving outward. Apply even pressure as you work your way to the outer edge.

Peel off the remaining backing paper and use the squeegee to smooth the other half of the decal onto the wall.

Remove air bubbles. For any remaining bubbles, try to smooth them out toward the nearest edge with your squeegee. For stubborn bubbles, poke a small hole with a pin to release the air.

Wait a few minutes, then slowly peel back the top transfer tape at a sharp 45-degree angle. If any part of the decal starts to lift, lay the transfer tape back down and rub over it again with the squeegee.

Admire your work!! Check for any loose edges and press them firmly down before finishg removing the top transfer tape.

**LARGE DECALS with more than one panel...
Installations requiring multiple panels should be ordered with overlapping panels for best results. Email us to ensure you get the panels that best fit your home installation needs. For larger decals, the "hinge" method is recommended for a smooth, bubble-free application.

We print with the utmost accuracy. But, a small discrepancy could happen between connecting decals. One part may be a little bit wider than the other by a few millimeters, SO to save time and make your experience better, - place the panels or decals on the floor, and if you need to make them match-- carefully cut off the excess, only then stick the decals on the wall! We are always happy to help out where we can!