Oppai Factory LCG Chassis for Injora IR60 TRX4m Body

The new Injora IR60 Body is really awesome isn’t it? After getting mine and looking at how the LCGs worked with it, the clearance issues with Hightrail links, and how low it mounted the trans plate below the body line; I decided to make my own bespoke chassis for it.

This chassis sucks the frame rails into the body by nearly 16mm and has the skids and battery tray integrated into each 1pc frame rail. Specifically designed to use my High Clearance Plate it has a completely smooth underside so you won’t get hung up in those typical 4m places. The battery is held down by the clipped body itself so no more straps or fiddling to swap batteries. Included are LH and RH Mounting trays for ESCs and or Receivers to tuck into the cab rather than having that mess of wires and the back of the bed. This also improved your weight bias.

Specifically designed to utilize the both the Defender/ Bronco 155mm and the Hightrail 165mm wheelbase without steering or rubbing issues even when set at max low. Fully capable of being used with the stand up or lay down servo mounts, and tons of mounting points for the shocks to dial in your IR60.

Lastly there are hooks build into the upper frame cradle that allow the use of a rubber band limiting strap to prevent unloading of the suspension on steep climbs.

Front shock tower braces included for both 180 and 370 motors, and an optional spare tore mount/ battery cover is included as well.

Kit comes complete with:

LCG Chassis
High Clearance Plate
SS Hardware
Black Rubber Band Limiting strap
Low Profile Bumpers for both Grill options
Optional Spare Tire Mount/ Battery Cover
Instructions/ Diagram

Note* The supplied High Clearance plate is required for this frame and is made of 3D Printed plastic same as the frame. If you would like to utilize a metal plate be it Aluminum or Brass please see the Tools section of the store where you can purchase a High Clearance Drill Jig and make your metal plate in to a High Clearance one.

LAYDOWN Servo recommended! You can use it with a typical stand up servo, but you won't be benefiting from the chassis nearly as much as it is meant to be a low CG chassis and needs the low profile and low CG Laydown mount to get the best performance.

Does NOT work with stock plastic driveshafts. The rubber pin retainer will not allow the battery tray to install. Suggest you use Injora shafts as they have the smallest profile and the most engagement.



Free Lifetime Replacements:

I understand that 3d parts have can be more susceptible to breaks over metal or injected nylon parts, so for as long as I am business I offer free lifetime replacements of any parts that break for any reason. Simply cover the shipping, and I can ship out any replacement part or parts you need to make your rig whole again. If you are international, I understand shipping costs more so I will give you multiple sets of whichever part was broken to save you if you have another accident in the future. All of my products evolve over time if I find a better method or update I can do to improve them. If you do have a break on an older ver. of the part, then I will supersede you to the current ver. for only the cost of shipping.

Disclaimer:

This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts.

Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child.

Due to a rather insane review I received, I need to state this, and be sure anyone else so inept HAD the opportunity to read this...