• May include: A silver clock face with black Roman numeral markings and a black background. The clock is mounted in a gray dashboard with a black trim.
  • May include: A black dashboard clock with a silver face and a white Bvlgari logo. The clock has Roman numeral markings and a silver ring around the edge.
  • May include: Black plastic 3D printed stand with four silver clips. The stand has a circular opening in the center. VAULT-TECH SOLUTIONS is printed on the stand.
  • May include: A black plastic square-shaped box with a round opening in the center. The box has a raised VTS logo on the front. The box is designed to hold a device.
  • May include: A before and after image showing how to modify a clock face. The image shows a white clock face with black trim. The before image shows the clock face with two tabs on the side. The after image shows the clock face with the tabs cut off. The text "Cut These Mount Tabs" is at the top of the image. The text "Clock Must be Modified as shown to fit" is at the bottom of the image.
  • May include: A set of car wiring connectors with red and black wires. The connectors are labeled "VAULT-TECH SOLUTIONS".
  • May include: A white electrical connector with three wires attached. The wires are brown, black, and orange. The connector is labeled "VAULT-TECH SOLUTIONS".
  • May include: A black clock face with silver trim and white hands. The clock face has the word "BVLGARI" written around the edge. The clock is connected to two wires, one red and one black. The clock has a white plastic connector and the text "GM P/N 15087592 NS P/N GM-0014-001-NO-CLIPG".
  • May include: A white electronic component with black wires and a white connector. The component has text that reads "GM-0011-001 MADE IN JAPAN" and "GM-0014-001-NO-CLIP INSPIN GM-0014-001" and "GMP/N/15087592 120-149".
  • May include: A red wire connector with two black wires attached. The connector is labeled "VAULT-TECH SOLUTIONS".
  • May include: A silver clock face with black Roman numeral markings and a black background. The clock is mounted in a gray dashboard with a black trim.
  • May include: A black dashboard clock with a silver face and a white Bvlgari logo. The clock has Roman numeral markings and a silver ring around the edge.
  • May include: Black plastic 3D printed stand with four silver clips. The stand has a circular opening in the center. VAULT-TECH SOLUTIONS is printed on the stand.
  • May include: A black plastic square-shaped box with a round opening in the center. The box has a raised VTS logo on the front. The box is designed to hold a device.
  • May include: A before and after image showing how to modify a clock face. The image shows a white clock face with black trim. The before image shows the clock face with two tabs on the side. The after image shows the clock face with the tabs cut off. The text "Cut These Mount Tabs" is at the top of the image. The text "Clock Must be Modified as shown to fit" is at the bottom of the image.
  • May include: A set of car wiring connectors with red and black wires. The connectors are labeled "VAULT-TECH SOLUTIONS".
  • May include: A white electrical connector with three wires attached. The wires are brown, black, and orange. The connector is labeled "VAULT-TECH SOLUTIONS".
  • May include: A black clock face with silver trim and white hands. The clock face has the word "BVLGARI" written around the edge. The clock is connected to two wires, one red and one black. The clock has a white plastic connector and the text "GM P/N 15087592 NS P/N GM-0014-001-NO-CLIPG".
  • May include: A white electronic component with black wires and a white connector. The component has text that reads "GM-0011-001 MADE IN JAPAN" and "GM-0014-001-NO-CLIP INSPIN GM-0014-001" and "GMP/N/15087592 120-149".
  • May include: A red wire connector with two black wires attached. The connector is labeled "VAULT-TECH SOLUTIONS".
View buyer photos
Report this item to Etsy

Escalade Clock Mount: Silverado, Sierra, Tahoe, Yukon (1999-2006)

VaultTechSolutions  
5 out of 5 stars

Item highlights

  • Materials: ABS

Seller's description

Install the factory BVLGARI dash clock from a 2002-2006 Cadillac Escalade into your 1999-2006 NBS Silverado, Sierra, Tahoe, Suburban or Yukon.

Most lower trim optioned trucks will have a blank cubby in this space. If your truck is equipped with a Airbag Switch, Traction Control, Parking Sensor, Or Ride Control Button these would need to be relocated or tucked into the dash still plugged in to avoid a check engine light.

You will receive the clock mount which includes new OEM clips for installation in your dash. Clock is not included, but can be easily found online or at junkyards part #15087592.

To install you will need to slightly modify the housing of the clock to fit, cut the top screw mount off flush with the body of the clock. And trim away the material i have marked in red on the last photo. The left picture is a unmodified clock, and the right picture is of what it should look like when done. Can be done very quickly with a pair of side cutters or a dremel.

To wire your clock in using the supplied harness & T wire taps if selected.

Orange wire is Constant 12V (Even when vehicle is off to keep time)

Brown wire is Illumination 12V for clock backlighting

Black wire is Ground/Negative

Your now modified clock will now clip securely into place in the mount and can now be placed into your dash using the lower pin to center it.

This mount is 3D Printed in ASA and will not melt or deform in any temperature you vehicle will be subject to. The flat face of the mount can be sanded and painted or vinyl wrapped to match any interior.

View more

9 views in the last 24 hours

Price:$36.99

Please select an option

You can only make an offer when buying a single item

Shipping & return policies
  • Get it by
    Nov 12-16
  • Returns & exchanges
    Accepted within 30 days
  • Cost to ship
    FREE to United States, 43215.

Reviews for this item

5.0

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience.

(9 reviews)

5.0 Item quality
4.9 Shipping
4.9 Customer service
100% Buyers recommend
Filter by category
5 out of 5 stars 5 This item

yohsio Oct 9, 2026

Very good customer service and beautiful piece with a nice finish, also fits perfectly no issue if u follow the instructions in the photos 10/10 would recommend if your looking to customize similar gmt800 dash.

yohsio Oct 9, 2026

5 out of 5 stars 5 This item

Chelsie Oct 3, 2026

Bought this for my husband. He loved it. Very easy to hook up. Great buy!

Chelsie Oct 3, 2026

5 out of 5 stars 5 This item

Etsy buyer Aug 4, 2026

Item was as described , fit flush and couldn’t be happier !

Etsy buyer Aug 4, 2026

5 out of 5 stars 5 This item

Ahhhh Jul 20, 2026

Fits perfect has a nice finish!

Ahhhh Jul 20, 2026

Photos from reviews

Seller's description

Specifications

May include: A silver clock face with black Roman numeral markings and a black background. The clock is mounted in a gray dashboard with a black trim.

Install the factory BVLGARI dash clock from a 2002-2006 Cadillac Escalade into your 1999-2006 NBS Silverado, Sierra, Tahoe, Suburban or Yukon.

Most lower trim optioned trucks will have a blank cubby in this space. If your truck is equipped with a Airbag Switch, Traction Control, Parking Sensor, Or Ride Control Button these would need to be relocated or tucked into the dash still plugged in to avoid a check engine light.

You will receive the clock mount which includes new OEM clips for installation in your dash. Clock is not included, but can be easily found online or at junkyards part #15087592.

To install you will need to slightly modify the housing of the clock to fit, cut the top screw mount off flush with the body of the clock. And trim away the material i have marked in red on the last photo. The left picture is a unmodified clock, and the right picture is of what it should look like when done. Can be done very quickly with a pair of side cutters or a dremel.

To wire your clock in using the supplied harness & T wire taps if selected.

Orange wire is Constant 12V (Even when vehicle is off to keep time)

Brown wire is Illumination 12V for clock backlighting

Black wire is Ground/Negative

Your now modified clock will now clip securely into place in the mount and can now be placed into your dash using the lower pin to center it.

This mount is 3D Printed in ASA and will not melt or deform in any temperature you vehicle will be subject to. The flat face of the mount can be sanded and painted or vinyl wrapped to match any interior.

Delivery details and policies

  • Get it by
    Nov 12-16
  • Returns and exchanges
    Accepted within 30 days
  • Ships from
    Oxford, PA
  • Cost to ship
    FREE to United States, 43215

    There was a problem calculating your shipping. Please try again.

Shop with confidence
Star Seller

This seller consistently earned 5-star reviews, shipped orders on time, and replied quickly to messages.

Etsy Purchase Protection

If something goes wrong with an order, we've got your back on all eligible purchases. View program terms

Climate investments

Etsy supports climate solutions, from electric delivery trucks to carbon offsets for every delivery. View how

Meet your seller

VaultTechSolutions
Tyler
VaultTechSolutions ·

Cochranville, Pennsylvania

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience. 4.8
·
248 sales
·
5 years on Etsy

Usually responds in 24 hours

Smooth shipping Has a history of shipping on time with tracking.

Speedy replies Has a history of replying to messages quickly.

Rave reviews Average review rating is 4.8 or higher.

You may also like

Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more

Explore related searches

1999 Chevy Silverado 1500

All4oldchevys

2002 Silverado

04 Silverado Cup

Listed on Nov 6, 2026
158 favorites
Homepage Electronics & Accessories Car Parts & Accessories Car Accessories

Looking for more? Find it on Etsy