Tulip Plaster Mold: Handmade Ceramic Slip Casting Mold (15x8.5cm)

This beautiful mold, made by us for the beautiful Tulip Mold in Kütahya where the ceramic capital of Turkey. Refsan is the biggest supplier in Turkey for ceramic-porcelain, glass, and other hobby materials.

Product Dimension (For Ceramic Casting Slip that has 6% shrinkage)

Product Dimensions
Mold Size: 25 x 20 x 20 cm
Product Size : 15 x 8.5 CM

Product information:
The shrinkage rates of the mud to be poured into it may vary depending on whether it is ceramic or porcelain mud.
Suitable for casting ceramic or porcelain clay.
If the edges of the mold are damaged or broken, it does not prevent you from getting a smooth product. The important thing is that the mold is smooth inside.
The plaster mold should be wiped with a damp sponge before casting and care should be taken to ensure that there are no dust and pieces inside.
If possible, the casting mud should be mixed thoroughly with the help of an electric mixer or a wooden spoon.
The mud to be put inside should be prepared 1 day in advance and glass water should be used during the mud preparation phase.
The mud should be poured slowly into the mold and the mold should be filled to the brim.
Depending on weather conditions, 2-4 castings can be made per day.
The mold life of the product is approximately 100 castings. It may vary depending on usage.


In some cases, molds may be sent wet because they are newly cast. If the mold arrives wet, we recommend that you do not use it until it dries. Depending on the ambient temperature, you can wait 1-2 days to remove moisture.

We need to inform you about one thing: As you know, molds are extremely heavy products. And shipping charges are also much more expensive than our other products. We try to pack as well as we can. However, sometimes it can be broken in shipping, in which case we, unfortunately, do not accept returns or reshipments. But if you agree to repay the shipping fee, we can send the item free of charge. See you in new shopping!