This is for the actual vinyl iron decal. You will iron on yourself.

Can be customized in any size and have many fonts and colors to choose from.

Can be glitter or plain vinyl. ***Unless otherwise noted, crab will be red glitter.***

Please send initials and color at check out. The initials will be blank, your shirt will show through.

Initials should be sent in order you would like on the finished product

************Contact me for custom sizes****************************


INSTRUCTIONS:
Does not adhere to Nylon very well

Position the design on the fabric and cover with a thin fabric. Set your iron to the cotton setting. Place the hot iron on the design for approximate 10 seconds while applying medium to firm pressure. Make sure that you are covering all of the edges of the design with the iron. Carefully pull up the backing to see if the design has stuck or needs to be heated more. On designs larger than the iron, it is easiest to iron the design in sections rather than going back and forth across the entire design. Slowly and carefully remove the clear plastic backing. Once you remove the clear backing, cover the design with the fabric and place the iron on the design for approximate 10 seconds more, applying medium to firm pressure. Allow to cool completely.
After the first wear or the first wash, if the design is loose on the edges, cover and reiron.