SEE HOW IT WORKS: https://youtu.be/r6iBoQhLWng
****************************************************************************************************
NEW & IMPROVED VERSION WITH LIGHT BRIDGE, STRONGER STEM AND BRIGHTER LIGHTS
****************************************************************************************************
A crowd pleaser every time I've worn it out, I've decided to share the joy after doing some serious upgrades to my first version of these. Now equipped with magnetic enclosures and pressure fit base for easy attachment to any headwear, these 3D printed SIMS inspired "Plumbobs" are the simplest, easiest but mostly eye catchiest accessory to any costume or lack thereof ^_^.
They come pre-assembled with neodymium magnets for a secure snap closure and can be used as storage or drop in some of the included self-powered LED lights for realistic video game glow at your next costumed event !!!
There are 8 color variations available ...
• RED
• GREEN
• WHITE (clear)
• YELLOW
• BLUE
• ORANGE
• BLACK
• PREMIUM** featuring Glow in the Dark shell, smd 5050 LEDs, rechargeable battery pack ( lasts 4-6 hrs ) and remote control to change your mood at will ^_^
For the Premium style, please select "white" at check out for the color option.
Pick your favorite and express your mood just like in the game ^_^.
**NOTE: because of all its electrical components PREMIUM version is quite top heavy and requires very tight fitting headgear to be worn properly/efficiently ( YOU'VE BEEN ADVISED )
Please follow this youtube link for assembly instructions or continue reading for assembly steps.
https://youtu.be/r6iBoQhLWng
STEP BY STEP ASSEMBLY DIRECTIONS.
1. At the middle top of your headwear, create an opening about the size of the inner hole of the short stem of the bottom diamond half.
2. Place the bottom half of the diamond onto your headwear over the hole you just created.
3. Align the circular plate on the inside of you headwear to the stem on the outside.
4. Reinforce the stability of the diamond by putting the included bolt through the stem, pressure fit disc & washer. Screw in tightly to nut ( optional ) on the inside ... careful not to overtighten.
5. (OPTIONAL but highly recommended) glue a thin layer of foam to the bottom of the circular plate (the surface that will make contact to your head) for comfort and additional support.
6. Turn on lights, close and Enjoy the easiest costume you've ever made ^_^
PRODUCT SPECS (Size: REGULAR)
• 2X 4.5" Tall x 4" Wide Plumbob ( 9-inch height total )
• 4X 5mm x 3mm Neodymium Magnets
• 1X Battery operated (CR 2032) surface mounted string led lights
• 1X 2.25" pressure fit disc
• 1X circular foam protective disc
• 1x 1/16 nut
• 1x 1/16 bolt
PRODUCT SPECS (size: DAINTY)
• 2X 3.5" Tall x 4" Wide Plumbob ( 7-inch height total )
• 4X 5mm x 3mm Neodymium Magnets
• 1X Battery operated (CR 2032) surface mounted string led lights
• 1X 2.25" pressure fit disc
• 1X circular foam protective disc
• 1x 1/16 nut
• 1x 1/16 bolt
PRODUCT SPECS (size: BABY)
• 2X 2.25" Tall x 2" Wide Plumbob ( 4.5-inch height total )
• 4X 5mm x 3mm Neodymium Magnets
• 1X Battery operated (CR 2032) surface mounted string led lights
• 1X 2.25" pressure fit disc
• 1X circular foam protective disc
• 1x 1/16 nut
• 1x 1/16 bolt
** DISCLAIMER ** This is NOT AN OFFICIALLY licensed product nor is it by any means affiliated with "The Sims" franchise or any of their parent companies. It's just fan art.