Applications and uses of this strap are multiples including but not limited to stop a toddler from age one to three to open single/double door refrigerators, appliances doors, or just for a quick fix. Use it around challenging adults and children with special needs. This is the best option for people that rents, travels on vacations, RVs and boat owners, grand parents house, day cares, assistance living facilities among others. Good to use on stain steel appliances, wood, metal, and glass surfaces. Best use is for indoors.
Description. This strap is 10" long aprox (including the buckle ) made of loop self adhesive Velcro. The buckle has a two digit combination lock. The combination can be change as many times is needed. The self adhesive back has a very strong bond.
Easy to install, easy to use, easy to remove it.
How to install it
1.Before you install, clean the surface of any dust or dirt before to place them. Look for the best place for you, over the handles, over the doors up high, etc. 2. Check the length and position that it will be finally placed. 3. Cut the length before you install it, if needed, make sure that the buckle sits in the middle of the gap between the handles of the doors. Look for the best alignment. 4. Peel off one of the sticky back side and place at the door(or handles) leaving the other side connected. 5. For better results wait 24 hours to get an stronger bond with the surface. Refer to picture to see an example of how you can place this strap.
How to remove it.
Pull the strap carefully. Scrub any remains using dish soap.
Important Notes.
1. If you use this product around children please notice that it may work around toddlers from ages one to five, depending on their ability to open buckles. Every child is different, and this an alternative to consider. This product does not replace supervision over your child. Please check this first before buying these products.
2. We have tried it in many models and 8" is the average that is needed for a double door refrigerator, this strap is 10" aprox long. Please double check before you purchase this item.
3. Do not use over hot surfaces. Performs better in interiors.
4. Once product is applied to surface it is no longer reusable for another surface.
5. Once the film is removed from loop strap it must be used immediately and do not place film back on loop strap once removed.
How to set the combination
• The original code is “00”
• To change or set
Locate pin in the side, depress pin with jewelers screwdriver, pen or toothpick
While still depressing the pin, rotate the dial to your desired number
If the wheel does not work after you adjust the code, you can directly push the other side.
Do this for each side, one for each number.
Be social with us at www.facebook.com/lockingstraps
Our products are made in USA. Patent pending.