Custom DTF Transfers: Ready to Press Heat Transfer Film

How to order:
1. Prepare your design, text or photo according to the dimension where you will press
2. Choose your print size from drop down list and add to cart.
3. Please send your messages via Etsy messages
4. If you want us to remove the background of the image, please add "Remove Background" to cart and be sure you have ordered together both.
5. After placing the order you can send us your images, text or photos via etsy messages or via email to "omerturan1@gmail.com" with order number.
6. We don’t change any color or don't resize your design and print it in the size you send .
7. Please ensure that the image dimensions match the size selected from the dropdown list. If the selected size is smaller than the uploaded image, the image will be proportionally scaled down for printing.
8. If your image can fit multiple times within the chosen size, please inform us how many pieces you want.
9. You don’t have to send the same image for different sizes, just send an image and inform us about the dimensions and the amount.
10. This product is for printing your design on film that is ready for press. Your image must be print ready, at the size you want it to be printed. Please ensure that your background is 100% transparent otherwise all artworks will be printed as it is. If you can’t send us the image or images in 3 weekdays your order will be cancelled and refunded.
We appreciate your attention to these details to ensure the best print quality.

- If you want to you can click the link below and order to make your design printed on a shirt.

https://www.etsy.com/listing/1903851031/custom-shirt-add-your-design-photo-or

IMAGE INSTRUCTIONS
- We recommend images to be in PNG format, minimum 300 DPI quality and high resolution to have best results.
- Please remove the background before sending us the image otherwise we will print as it is. If you want us to remove the background please add background removal to the cart and inform us in the personalization box.

- By purchasing this product, you confirm that you hold the copyright to the images being printed. We are not responsible for any copyright issues
IRON-ON DTF DECAL TRANSFER INSTRUCTIONS

- Prepare the Surface
Ensure the fabric (shirt, bag, hat, etc.) is clean and completely dry. If applying to a hard surface, make sure it's free of dust, moisture, and grease. For fabric, ironing beforehand and letting it cool is recommended. Lay garments on a firm, wrinkle-free surface.

- Position the DTF Decal
Place the decal on the surface with the printed side facing down. Ensure proper alignment.

- Cover with Parchment or Teflon Paper
Place parchment or Teflon paper over the decal to protect the iron and ensure smooth transfer.

- Preheat the Iron
Set the iron to 300°F or the highest safe temperature for the fabric. Turn off steam and empty the water reservoir. Allow the iron to reach temperature.

- Apply Heat and Pressure
Press the iron firmly over the parchment or Teflon paper. Apply even pressure for 15–20 seconds across the entire design.

- Cool and Peel
Set the iron aside safely. Wait 15 seconds for the decal to cool. Remove parchment/Teflon paper. Lift a corner of the decal film to check transfer. If incomplete, repeat Step 5. If successful, peel off the film completely.

- Final Press
Place parchment/Teflon paper over the design and iron again for 15 seconds to ensure durability.

- Turn Off the Iron
Always ensure your iron is powered off after use.

- Using a Heat Press?
Follow the same instructions for heat press machine application.
-
DTF TRANSFER CARE INSTRUCTIONS

Washing:
- Turn inside out – Flip your garment inside out before washing to minimize wear on the transfer.
- Use cold water – Wash with cold or cool water whenever possible to prevent fading and shrinkage.
- Choose mild detergent – Avoid harsh chemicals and bleach, which can damage both the fabric and the design.
- Gentle cycle – Opt for a delicate cycle to reduce stress on the transfer.
- Skip fabric softeners – These can weaken the transfer’s adhesion; use sparingly or not at all.
- Hand wash if possible – For extra longevity, hand washing is the safest method, though machine washing works too.

Drying:
- Lay flat to dry – Avoid hanging to prevent stretching.
- Use low heat if drying – If using a dryer, select a cool setting to protect the transfer.
- Do not dry clean – Dry cleaning chemicals can damage the design.

Ironing:
- Iron inside out – Turn the garment inside out before ironing.
- Use low heat – Excessive heat can distort the transfer.
- Avoid direct contact – Never place the iron directly on the print—use parchment or Teflon paper as a barrier.
- Optional: To prevent the design on the front or back from transferring to the other side, place parchment or Teflon paper inside the shirt.