Oppai Factory IR60 Retrofit Kit w/ 4M Trans Conversion Plate for CR18P Juice-Up

Oppai Factory IR60 Retrofit Kit w/ 4M Trans Conversion Plate for CR18P Juice-Up

Got a Juice-Up or EVO and are tired of the slop in the drivetrain and non-existent gearings options? Maybe you wish it had a sweet Toyota style body over the stock one? Well this kit allows you to do both those things in 1 swing.

Included is a High Clearance 4m Conversion Skid Plate as well as Body Mounts and Smooth Side Wings to fit the Injora TRX4m IR60 Body without any permanent modifications to the frame.

The Body Mounts use the same rear hinge system as it does on the 4M, and clips into the grill at the front. The side Wings are perfectly fitted to the frame as well as the body and include a center mounting tray for the battery to improve weight distribution.

Note: The front clip only works with the OE Style Grill. If you wish to use the Tuner Style Grill, then a custom mounting solation will be needed.

The high clearance plate sucks the underside of the skid up 5mm to become flush with the framerails and decrease underside high centering and hang ups.

Works with stock driveshafts (snug fit on the 4M output shafts) and can be used with CR18 or SCX24 (C10) non D-Shaped shafts. It can also be used with TRX4m shafts if you want to do a portal delete.

*Please note that if you are running your rig in the counter spinning shaft layout you will need to flip the rear diff and go back to a conventional setup.

Comes with instructions and SS hardware to mount the trans and is able to run both the stock m1.6 or m2 screws for if you are running stock or upgraded metal links.

This kit is designed around the 4M Conversion plate so if you prefer to use the stock trans then the Battery Mount will not be able to be used and you will need to figure out your battery mounting and electronics placement.



Free Lifetime Replacements:

I understand that 3d parts have can be more susceptible to breaks over metal or injected nylon parts, so for as long as I am business I offer free lifetime replacements of any parts that break for any reason. Simply cover the shipping, and I can ship out any replacement part or parts you need to make your rig whole again. If you are international, I understand shipping costs more so I will give you multiple sets of whichever part was broken to save you if you have another accident in the future. All of my products evolve over time if I find a better method or update I can do to improve them. If you do have a break on an older ver. of the part, then I will supersede you to the current ver. for only the cost of shipping.
Disclaimer:

This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts.

Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child.

Due to a rather insane review I received, I need to state this, and be sure anyone else so inept HAD the opportunity to read this...