• Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords Brown
  • May include: A brown, 3D-printed cable organizer stand featuring three distinct slots for holding cords. A white USB-C cable is inserted into the leftmost slot, with the connector head facing upward, showcasing the standard USB symbol on its casing.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords image 3
  • May include: A brown plastic C-clamp cable organizer attached to the edge of a white circular surface. The clamp features a threaded screw mechanism and holds a white USB-C cable with the text "onn." printed on the connector head.
  • May include: A brown, C-shaped plastic cable organizer clip attached to a circular white stone surface. The clip features two vertical slots holding two white charging cables, one with a USB-C connector labeled onn. and one with a standard USB-A connector.
  • May include: A light brown, 3D-printed C-clamp with a three-pronged top and a threaded screw mechanism at the base. A clear plastic ruler is positioned alongside the clamp, showing the main body height is approximately 1.5 inches tall.
  • May include: A brown C-clamp with a threaded screw and a knob, positioned next to a metal ruler showing a measurement of approximately 1.25 inches for the inner opening width. The clamp has a U-shaped frame and a textured, matte finish.
  • May include: A brown C-clamp with a threaded screw mechanism, positioned next to a metal ruler showing a measurement of approximately 1 inch for the screw diameter. The clamp features a U-shaped frame and a textured surface from 3D printing.
  • May include: A brown 3D-printed C-clamp featuring a U-shaped body with two vertical slots at the top and a threaded screw mechanism with a circular knob at the bottom, designed to secure onto the edge of a flat surface for mounting purposes.
  • May include: A bright yellow C-clamp with a threaded screw mechanism attached to the edge of a circular white stone disc. The clamp features a flat top surface and a textured adjustment knob at the bottom, securing the disc to a thin gold metal frame.
  • May include: A bright yellow C-clamp made of plastic, featuring a threaded screw mechanism with a knob at the bottom. The clamp is securely attached to the edge of a thick, circular white stone disc, holding it firmly in place against a metal frame.
  • May include: A bright yellow C-clamp made of plastic, featuring a top flat surface and a threaded tightening knob at the bottom. The clamp is securely attached to the edge of a round, white marble tabletop that is supported by a thin gold metal frame.
  • May include: Two C-clamps attached to a circular white stone disc supported by a gold-colored metal wire stand. One clamp features a metallic iridescent finish with green and purple hues, while the other clamp is a solid matte yellow plastic.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords image 14
  • May include: A 3D-printed clamp featuring a vibrant iridescent finish that shifts between green, purple, and gold hues. The clamp has a U-shaped design with a threaded adjustment knob at the bottom, securely attached to a thin, gold-colored metal frame.
  • May include: A multi-colored, iridescent 3D-printed clamp with a three-pronged top and a threaded tightening knob, attached to a white circular disc. A separate bright yellow C-clamp is also attached to the side of the white disc.
  • May include: Two small, rectangular plastic clips with three distinct, curved prongs extending from one side. One clip is a solid, bright yellow, while the other features a metallic, iridescent finish that shifts between green, blue, and purple hues.
  • May include: Two C-shaped clamps attached to a circular white stone disc. One clamp is a solid bright yellow, while the other features a gradient of green, purple, and blue. Each clamp has a threaded screw mechanism underneath for tightening.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords Silver
  • May include: A silver-colored, 3D-printed plastic clamp with a flat top surface and a vertical side piece. The object features three distinct, square-shaped recessed compartments along its top edge and is designed to grip onto a rounded edge.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords Brown
  • Product video
  • May include: A brown, 3D-printed cable organizer stand featuring three distinct slots for holding cords. A white USB-C cable is inserted into the leftmost slot, with the connector head facing upward, showcasing the standard USB symbol on its casing.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords image 3
  • May include: A brown plastic C-clamp cable organizer attached to the edge of a white circular surface. The clamp features a threaded screw mechanism and holds a white USB-C cable with the text "onn." printed on the connector head.
  • May include: A brown, C-shaped plastic cable organizer clip attached to a circular white stone surface. The clip features two vertical slots holding two white charging cables, one with a USB-C connector labeled onn. and one with a standard USB-A connector.
  • May include: A light brown, 3D-printed C-clamp with a three-pronged top and a threaded screw mechanism at the base. A clear plastic ruler is positioned alongside the clamp, showing the main body height is approximately 1.5 inches tall.
  • May include: A brown C-clamp with a threaded screw and a knob, positioned next to a metal ruler showing a measurement of approximately 1.25 inches for the inner opening width. The clamp has a U-shaped frame and a textured, matte finish.
  • May include: A brown C-clamp with a threaded screw mechanism, positioned next to a metal ruler showing a measurement of approximately 1 inch for the screw diameter. The clamp features a U-shaped frame and a textured surface from 3D printing.
  • May include: A brown 3D-printed C-clamp featuring a U-shaped body with two vertical slots at the top and a threaded screw mechanism with a circular knob at the bottom, designed to secure onto the edge of a flat surface for mounting purposes.
  • May include: A bright yellow C-clamp with a threaded screw mechanism attached to the edge of a circular white stone disc. The clamp features a flat top surface and a textured adjustment knob at the bottom, securing the disc to a thin gold metal frame.
  • May include: A bright yellow C-clamp made of plastic, featuring a threaded screw mechanism with a knob at the bottom. The clamp is securely attached to the edge of a thick, circular white stone disc, holding it firmly in place against a metal frame.
  • May include: A bright yellow C-clamp made of plastic, featuring a top flat surface and a threaded tightening knob at the bottom. The clamp is securely attached to the edge of a round, white marble tabletop that is supported by a thin gold metal frame.
  • May include: Two C-clamps attached to a circular white stone disc supported by a gold-colored metal wire stand. One clamp features a metallic iridescent finish with green and purple hues, while the other clamp is a solid matte yellow plastic.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords image 14
  • May include: A 3D-printed clamp featuring a vibrant iridescent finish that shifts between green, purple, and gold hues. The clamp has a U-shaped design with a threaded adjustment knob at the bottom, securely attached to a thin, gold-colored metal frame.
  • May include: A multi-colored, iridescent 3D-printed clamp with a three-pronged top and a threaded tightening knob, attached to a white circular disc. A separate bright yellow C-clamp is also attached to the side of the white disc.
  • May include: Two small, rectangular plastic clips with three distinct, curved prongs extending from one side. One clip is a solid, bright yellow, while the other features a metallic, iridescent finish that shifts between green, blue, and purple hues.
  • May include: Two C-shaped clamps attached to a circular white stone disc. One clamp is a solid bright yellow, while the other features a gradient of green, purple, and blue. Each clamp has a threaded screw mechanism underneath for tightening.
  • Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords Silver
  • May include: A silver-colored, 3D-printed plastic clamp with a flat top surface and a vertical side piece. The object features three distinct, square-shaped recessed compartments along its top edge and is designed to grip onto a rounded edge.
Report this item to Etsy

Desk Cord Organizer Clamp, Adjustable 3D Printed Cable Holder for Charging Cords

Item highlights

  • Materials: PLA
  • Made to order

Seller's description

Keep charging cables on your desk instead of dropping behind it. This adjustable 3D-printed cord organizer clamps to the edge of a desk, table, or nightstand and keeps up to two cables within easy reach.

CHECK YOUR DESK BEFORE ORDERING
Measure your desk edge before choosing this organizer. It works best on flat edges up to approximately 1 inch thick, with about 1 inch of flat clearance on both the top and underside. Rounded or beveled edges may not hold securely. Unsure about the fit? Send us a photo and measurements before ordering.

NO ADHESIVE OR DRILLING
The pressure-fit screw clamp installs without sticky residue, nails, or permanent holes. Tighten only until snug to protect your furniture.

FITS YOUR SETUP
• Holds up to 2 USB-C, Lightning, or standard USB cables
• Best for flat-edged surfaces up to 1 inch (2.6 cm) thick
• Requires about 1 inch of flat surface on both the top and underside
• May not grip rounded or beveled edges securely

SIZE
• Width: approximately 2.5 inches
• Height: approximately 2 inches
• Maximum clamp opening: approximately 1 inch

COLOR & MATERIAL
Choose from the available colors. Each organizer is made to order in our home studio using lightweight PLA plastic. Small layer lines and slight variations are normal characteristics of 3D-printed products.

INSTALLATION
Place the organizer on a flat desk edge and turn the screw until the clamp feels secure. Do not overtighten. Route up to two cables through the top notches and keep your chargers ready when you need them.

View more

Item review

Why this review appears

All reviews are from verified buyers. This review is shown automatically based on factors like recency, whether it includes comments, your chosen language, and whether the rating reflects the typical experience with the shop.

“This cord organizer works perfectly for me. For reference, this organizer is clamped to the iconic Vitsoe 621 side table, and it’s as if the cord organizer was custom made for the table. Fits the table perfectly, as well as a thicker USB-C cord from a PC dock. Thank you also for the lovely little gift and uplifting messages!”

Wendy

Jun 24, 2026

View all

Price:$10.00

Ships from Kentucky

Please select a color

You can only make an offer when buying a single item

Shipping & return policies
  • Get it by
    Nov 4-10
  • Cost to ship
    $5.63 to United States, 43215.

Reviews for this item

4.8

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience.

(5 reviews)

4.6 Item quality
4.8 Shipping
4.7 Customer service
100% Buyers recommend
Filter by category
5 out of 5 stars 5 This item

Wendy Jun 24, 2026

This cord organizer works perfectly for me. For reference, this organizer is clamped to the iconic Vitsoe 621 side table, and it’s as if the cord organizer was custom made for the table. Fits the table perfectly, as well as a thicker USB-C cord from a PC dock. Thank you also for the lovely little gift and uplifting messages!

Wendy Jun 24, 2026

4 out of 5 stars 4 This item

Inactive account Jan 22, 2026

Unfortunately for me, the night table rim that I bought this cable organizer for failed, as the screw-on was not deep enough. It arrived unadorned, but smartly packaged. This was the only clamp that I found that might attach how I wanted it to do.

Inactive account Jan 22, 2026

5 out of 5 stars 5 This item

Etsy buyer Nov 15, 2025

Great product. Just what I was looking for. Thanks!

Etsy buyer Nov 15, 2025

5 out of 5 stars 5 This item

Christine Nov 6, 2025

Excellent product and exactly what I was looking for. I am ordering another one for some more loose cables on my desk.

Christine Nov 6, 2025

Photos from reviews

Seller's description

Specifications

Keep charging cables on your desk instead of dropping behind it. This adjustable 3D-printed cord organizer clamps to the edge of a desk, table, or nightstand and keeps up to two cables within easy reach.

CHECK YOUR DESK BEFORE ORDERING
Measure your desk edge before choosing this organizer. It works best on flat edges up to approximately 1 inch thick, with about 1 inch of flat clearance on both the top and underside. Rounded or beveled edges may not hold securely. Unsure about the fit? Send us a photo and measurements before ordering.

NO ADHESIVE OR DRILLING
The pressure-fit screw clamp installs without sticky residue, nails, or permanent holes. Tighten only until snug to protect your furniture.

FITS YOUR SETUP
• Holds up to 2 USB-C, Lightning, or standard USB cables
• Best for flat-edged surfaces up to 1 inch (2.6 cm) thick
• Requires about 1 inch of flat surface on both the top and underside
• May not grip rounded or beveled edges securely

SIZE
• Width: approximately 2.5 inches
• Height: approximately 2 inches
• Maximum clamp opening: approximately 1 inch

COLOR & MATERIAL
Choose from the available colors. Each organizer is made to order in our home studio using lightweight PLA plastic. Small layer lines and slight variations are normal characteristics of 3D-printed products.

INSTALLATION
Place the organizer on a flat desk edge and turn the screw until the clamp feels secure. Do not overtighten. Route up to two cables through the top notches and keep your chargers ready when you need them.

Delivery details and policies

  • Get it by
    Nov 4-10
  • Returns and exchanges
    Not accepted
  • Ships from
    Harned, KY
    Shorter shipping distances are kinder to the planet
  • Cost to ship
    $5.63 to United States, 43215

    There was a problem calculating your shipping. Please try again.

Shop with confidence
Etsy Purchase Protection

If something goes wrong with an order, we've got your back on all eligible purchases. View program terms

Climate investments

Etsy supports climate solutions, from electric delivery trucks to carbon offsets for every delivery. View how

You may also like

Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more

Explore related searches

Cord Holder

Clamp Cable Holder

Cable Holder Wall Mount

Electric Cord Holder

Desk Clamp Cable Management

Cord Organizer Storage

Hanging Cord Organizer

Listed on Oct 27, 2026
43 favorites
Homepage Electronics & Accessories Cables & Cords Cord Ties & Organizers