Only 1 left and in 15 carts
Price:$47.95
MU32 - SCX24 / TRX4m Brushless ESC w/ NSDRC BEC – Custom Tunes Available - AM32 Firmware
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
Returns & exchanges accepted
You can only make an offer when buying a single item
Highlights
Introducing an economical brushless speed controller for your mini and micro RC crawlers.
Our goal is to make high-end/high-performance modifications more affordable and attainable for everyone in the micro crawler community . Our MU32 speed controller helps us achieve that.
We use brushless ESC’s with AM32 firmware [updated to the most recent stable firmware] and wire in a NSDRC nano-BEC for maximum performance from your servo's and accessories. You have the option as to what voltage you’d like us to build you ESC with [6.0v, 7.4v, or 8.4v], and your choice of battery connector between a JST and XT30. For the JST connectors, we sourced the thickest gauge pre-wired JST plugs to use for our speed controllers [18g].
Also, as part of the purchase, you’ll be able to tell us which brushless motor you have and we’ll upload a custom tune to optimize your motor [this is not a mandatory step! You can still use the ESC with the factory loaded parameters on any brushless motor.].
NOTE: USB dongles will also be available if you’re interested in changing parameters yourself. If you change parameters and are unhappy, the default files are available.
SPECIFICATIONS:
-Firmware: AM32
-Output current: 30amp continuous , 50amp burst [seconds]
- BEC output: 6.0v-8.4v 4A [NSDRC nano BEC]
-Lipo size: 2-4S
-Low Voltage Cutoff: yes
-Battery plug type: JST or XT30
-Support signal: PWM/DSHOT/Sine, etc.
-Size: 39x11mm
Please make sure you select with voltage BEC and which connector you'd like when purchasing. If no selection is made, default configuration will be 6.0v BEC and JST battery connector. THANK YOU!!!
***Disclaimer: LVC [ low voltage cutoff/protection] is set to 3.4v , but because the nature of LIPO batteries, we always recommend monitoring the performance of your car. If you see a slight drop in performance with a lithium-polymer battery, we suggest you stop running your car and throwing the battery on a charger as soon as possible. The highest risk with lithium based batteries is over-discharging cells.***
**Orders placed with the discount code "COMEBACK22JR46" will no longer be accepted. We are sorry for the inconvenience**
-
Order today to get by Jun 29-Jul 1
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
-
Returns & exchanges accepted within 30 days
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
-
Cost to ship: $5.97
-
Ships from: Lomita, CA
There was a problem calculating your shipping. Please try again.
Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases —
see program terms
Reviews for this item
What buyers say, summarized by AI: Great quality Helpful seller
very good quality good performance
good quality easy to program good low speed control and good drag break 😎👍🏻
Mother Nature will never stop tiny trucks 🫡 the patience was worth it
Outstanding customer service and a great esc will be buying more in the future for my other trucks no tuning needed and very smooth throttle control.
Photos from reviews
-
Extra-Large RC Crawler Hill & Bridge – 1/24 and 1/18 Scale | TRX4M, SCX24, Axial, Traxxas, FTX | Indoor Terrain and Display Stand
$67.23
-
RC Crawler Hill Climb: 1/24 & 1/18 Scale Rock Terrain - TRX4M, SCX24
$41.70
-
Modular RC Crawler Terrain Starter Set: 1/24 & 1/18 Scale PLA+
$54.54
-
Micro RC Crawler Obstacle Set: Indoor/Outdoor Ramp for SCX24, TRX4M
Sale Price $28.00
Original Price $40.00
-
Modular RC Crawler Terrain 1/18 and 1/24 scale 4 Hex Starter Kit
$120.00
-
SCX24 Deadbolt Square Snorkel - 1/24 Scale Micro Crawler
$5.99
-
RC Crawler Gate Marker Set (10pcs): 1/24 & 1/18 Scale PLA+ Course
$39.62
-
Modular RC Crawler Terrain 1/18 and 1/24 scale 7 Hex Starter Kit - Basic Version
$200.00
-
Modular RC Crawler Terrain: "Big Corner" - 1/24 & 1/18 Scale
$61.39
-
Modular RC Crawler Ramps: 1/24 & 1/18 Scale Terrain
$36.79
-
Modular RC Crawler Seesaw: 1/24 & 1/18 Scale Terrain
$38.17
-
RC Crawler Rocker Seesaw: 1/24 & 1/18 Scale Terrain Feature
$49.67
Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.
Shoppers with similar taste loved these
-
Digital download
Track Bar Bracket - Upper Frame Side - DXF Files
$7.37
-
Digital download
Shock Tab MEGA PACK DXF File Collection- Scalable - 1802.FarbricationCompany
$9.99
-
Digital download
Offroad Washer DXF Files for Laser Waterjet Plasma
Sale Price $2.99
Original Price $3.99
-
Digital download
Panhard / Trac Bar Frame Mount DXF File
$4.35
-
Digital download
3 and 4 Link Panhard / Trackbar Adjustable Axle Mount (Minimal Bending Required)
$7.99
-
Digital download
Winch Fairlead Mount - DXF Files
$5.16
-
Digital download
2.625" Suspension Link Mount DXF Files - 1802.FabricationCompany
$6.99
-
Digital download
Chev 14 Bolt Truss with Pinion Guard and Bridge Included DXF CNC Files
Sale Price $11.80
Original Price $14.75
-
Digital download
Dual Mount 4 Link Frame Bracket DXF File
$9.98
-
Digital download
Fish Plate DXF File 4 Sizes
$4.87
-
Digital download
Clevis Bumper Mount DXF File
$3.89
-
Digital download
Universal Winch Plate DXF File
$3.99