3D STL mermaid hands with magnets female Doll BJD

My 3D model store is built on the principle of a constructor. All feminine details fit together. All masculine details fit together too. You can just choose the ones that you like. I also highlight with color and design what in my opinion goes well with each other. And sometimes you can find my special recommendations in the description of 3d models. For your convenience, the store is divided into sections.

In my work I use Wanhao Duplicator 7 and FunToDo photopolymer (resin), white.

Size: There are 2 types of models in the archive (with and without support). These models are for dolls with height = 30cm / 11.81inch. I recommend resizing 3D models with supports from 93% to 130%. This will not affect print quality. 3D models without supports can be resized from 93% to 200% without loss of quality and strength. But then you will need to build support for your type of printer.

Materials:
3D models with supports are prepared for 3D printing from photopolymers (resin). These 3D models were tested and the placement of the supports was not automatic or random. I always try to make the print result perfect and reduce post-processing.

3D models without supports can be used for printing from polyamide.

For PLA 3d printing: I recommend using PLA plastics for my dolls (not ABS). You also need to take 3D models without supports, increase them by 150% and build supports for your type of 3D printer. My favorite is the treelike supports for printing from PLA. (best quality). It is necessary to enlarge the model because it is very difficult to print thin fingers in a smaller size.

I try to constantly update my store, add something new. Email me if you have any suggestions on this. And, of course, write to me if you have any questions about 3D printing. I always try to help.

In the document you will find a link to download the archive. Please write to me if you have questions or problems with the files.

The full body of the doll can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39582188

The other heads, ears and horns: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39582284

portrait heads can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39583908

Hands can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39592629

The feet can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39583358

other body details (e.g. tail) can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39582584

Accessories (eyes or shoes) can be found here: https://www.etsy.com/shop/3DprinterArtDolls?ref=seller-platform-mcnav§ion_id=39592219


a little bit about how these dolls were created:
https://vk.com/club148227573
https://www.youtube.com/channel/UCM4Fm_4l_M3vdBJ_xUkNkTQ