New 4 Set Trail Showcase, Electric Motocross, Trail Rider, Off-Road Replica Suspension Dirt Bikes 3D Models .stl Files Instant Download

1. New Off-Road Bike Scale Full Suspension Electric Dirt Bike 3D Model .stl File Instant Download

Off-Road Bike - model kit (Assembly Guide Include)🖤

Edit: Updated Handlebars for more reliable prints

⚡This is a 1:9 scale Full Suspension Electric Dirt Bike model with FUNCTIONAL front suspension, rear suspension, rotating wheels and removable battery. It is easy to print and assemble and has a lot of realistic visual detail. Fully 3D printed besides 2 springs (optional) for the suspension.

⚡This model is probably my most detailed yet, All the bikes linkage is accurate to the real one - all freely moving and functional.

⚡Dirt AND Supermoto Wheels Available! (Separate print profiles)

⚡You will need some glue!

⚡CLEAN BUILD PLATE BEFORE PRINTING FOR BEST RESULTS!! :)

⚡parts - especially on the frame have very tight tolerances!

⚡Frame along with all the functioning linkage is fully print in place with few supports (remove with care!)

⚡Spring Dimensions - Both the front and rear suspension uses springs which you can easily find in pens

Front Spring →

⚡Diameter - 5mm or less.
⚡Length - 30 mm or less

Rear Spring →

⚡OUTER diameter - 6mm or less.
⚡INNER diameter - 3.5mm or more.
⚡Length - Around 20mm (not a defined number - you can experiment!)



2. New Trail Rider Scale Full Suspension Dirt Bike 3D Model .stl File Instant Download


This is a 1:9 scale Full Suspension Dirt Bike model with FUNCTIONAL front suspension, rear suspension and rotating wheels. Fully 3D printed besides 2 springs (optional) for the suspension.🌟

(Assembly Guide Include) 🔧

⚡It is decently big. I did this purposely so that scale is realistic in comparison to all my other models

⚡All the bikes rear suspension linkage is accurate to the real one - all freely moving and functional.

⚡FOR ASSEMBLY INFO - SCROLL DOWN

DISCLAIMER -
CLEAN BUILD PLATE BEFORE PRINTING FOR BEST RESULTS!! :)
parts - especially on the frame have very tight tolerances!

⚡Frame along with all the functioning linkage is fully print in place with few supports (remove with care!)

⚡What you will need - Assembly requires Glue

⚡Spring Dimensions - Both the front and rear suspension uses springs which you can easily find in pens

Front Spring →

⚡Diameter - 5mm or less.
⚡Length - 40 mm or less

Rear Spring →

⚡OUTER diameter - 5mm or less.
⚡INNER diameter - 3.5mm or more.
⚡Length - Around 30mm or less (not a defined number - you can experiment!)

3. New Trail Bike Showcase Electric Mini Dirt Suspension Bike .STL File Instant Download

This is a 1:9 scale Talaria X3 / X3 Pro electric dirt bike model featuring working front and rear suspension, and working wheels. The model is designed to be easy to print and assemble while still keeping realistic proportions and details. Everything is 3D printed except two optional springs used for the suspension. 🚴

(Assembly Guide Include) 🔧

This is one of my most detailed builds so far. The suspension linkage is modeled after the real Talaria X3/X3 Pro and is fully articulated and functional, not just for looks.


💠Clean your build plate and add plate glue before printing for best results.

💠Some parts, especially the frame, use tight tolerances for proper fit.

💠The frame and all suspension linkages are print-in-place with minimal supports (remove carefully).


Spring Info 👀

Both front and rear suspension can use springs commonly found in pens.

Front suspension spring: (I used a generic pen for the front)

• Diameter: ≤ 5 mm
• Length: ≤ 30 mm

Rear suspension spring: (I used a ‘Pilot’ pen for the rear)

• Outer diameter: ≤ 6 mm
• Inner diameter: ≥ 3.5 mm
• Length: ~20 mm (adjust as needed)


4. New Electric Motocross Trail Model Black with Knobby Tires Full Suspension Bike 3D Model .stl File Instant Download

Features:

⚡Removable Battery - (yes you read that right, a removable battery!)
⚡Working front and rear suspension
⚡rotating wheels
⚡accurate rear suspension linkage
⚡Assembly Instructions attached as a PDF in the documentation section below!


⚡What you will need:

Springs (can be found in old pens!)
Super glue


Front Spring

⚡Diameter - 5mm or less.
⚡Length - 20 mm


Rear Spring

⚡OUTER diameter - 6mm or less.
⚡INNER diameter - 3.5mm or more.
⚡Length - Around 20mm (not a defined number - you can experiment!)


Thank You Very Much! Come Again.