Sweetie I'm OK with Being Villain Ready to Press DTF, Heat Transfers, Iron-on

Name: Sweetie I'm OK with Being Villain Ready to Press DTF, Heat Transfers, Iron-on
Brand: pixelprintland
SKU: 4461611912
Availability: InStock
Rating: 4.9 (139 reviews)

pixelprintland

Arrives soon! Get it by Jun 6-10 if you order today

Design

Please select an option

Quantity

You can only make an offer when buying a single item

Star Seller. This seller consistently earned 5-star reviews, shipped on time, and replied quickly to any messages they received.

Highlights

Supplies for making crafts
Materials: Transfer paper

Sweetie I'm OK with Being Villain DTF, Bubble Gum Disney Villains Ready to Press DTF, Heat Transfers, Iron-on

🖨️ DTF Transfer Application Instructions

Please read before pressing your transfer.
These instructions are for applying Direct-to-Film (DTF) transfers onto garments such as cotton, polyester, blends, and more.

🌡️ HEAT PRESS SETTINGS
(Settings may vary slightly by press type, so test first if possible.)
• Temperature: 290–320°F (143–160°C)
• Pressure: Medium to firm (around 60 PSI)
• Time: 10–15 seconds

👕 APPLICATION STEPS
1. Pre-press your garment
○ Press for 3–5 seconds to remove moisture and wrinkles.
○ Make sure the surface is flat and smooth.
2. Place the transfer
○ Position the DTF transfer film side up (ink down) on the garment.
○ You can use heat-resistant tape if needed to hold it in place.
3. Press the transfer
○ Use the settings above (290–320°F, 10–15 sec, medium-firm pressure).
○ Ensure even heat and pressure across the entire design.
4. Peel the film
○ COLD PEEL: Let it cool completely before removing the film slowly.
(If your transfers are “hot peel,” specify that here instead.)
5. Final press (optional but recommended)
○ Cover the design with a parchment sheet or Teflon sheet.
○ Press again for 5 seconds to ensure durability and a smooth finish.

🧺 CARE INSTRUCTIONS
• Wait 24 hours before washing.
• Wash inside out in cold water.
• Tumble dry low or hang dry.
• Do not bleach or iron directly on the design.

💡 TIPS
• Always test one transfer on similar fabric before doing bulk orders.
• DTF transfers work best on smooth, lint-free garments.
• Avoid using steam during pressing.

✨Important Note: If the image does not fully transfer, repress with the parchment paper in place, let it cool, and then try peeling again. This process requires a heat press capable of delivering 60PSI of pressure.

✨Remember, the success of a DTF transfer can depend on the specific equipment and materials used. Follow these guidelines to achieve the best results and make your designs stand out.

Thank you for your purchase!

Order today to get by Jun 6-10
Returns & exchanges not accepted
Cost to ship: $5.00
Ships from: Richmond, TX

There was a problem calculating your shipping. Please try again.

Country

Zip code

Please enter a valid zip code.

Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases — see program terms

Etsy invests in climate solutions like electric trucks and carbon offsets for every delivery. See how