Sim Racing Drink System - Hands Free Hydration for Sim Rig | Button Box and Steering Wheel Controlled | Sim Racing Accessories | DrinkBox

Press a button. Drink. That's it.

Bind the DrinkBox to any button on your wheel, button box, or even your pedals. On-demand hydration without ever breaking focus or lifting your hands.

Use it standalone straight out of the box, or build it into the full SimRacingCraftsmen hydration ecosystem — running the same motorsport-tested pump, the same bottle, and the same tubing as our RealRacingCraftsmen kits actually racing in GT and endurance cars today.

Add a Bottle Mount for a clean single-bottle setup, or go all-in with the Endurance Bottle Dock, near-identical to our real racing dock, just adapted in material and mounting for your rig.

Everything it connects to is listed below.

KEY FEATURES

- Motorsport-grade brushless pump
- On-demand hydration at the press of a button
- Toggle switch to arm the system, based on real GT race cars
- RGB LED status indicator
- The heart of the SimRacingCraftsmen hydration ecosystem: the exact same motorsport-tested pump, bottle and tubing as our RealRacingCraftsmen systems racing in GT and endurance cars today
- Fits standard ModuRig 100mm button box slot
- Fits any VESA 50 mount
- Food-safe internal components: liquid only contacts the tubing, never the pump
- Works with water, sports drinks and fizzy beverages
- Easy to clean and maintain
- Free DrinkBox PC app: bind any button box, keyboard or joystick input, three control modes, speed control, customisable RGB LED, runs silently in the system tray
- TRIMODE CONTROL SYSTEM
- Hold Mode: drink only while holding the control
- Toggle Mode: continuous flow with a single input
- Burst Mode: custom timed pulses for quick, controlled sips

Fully configurable through the custom SRC DrinkBox control application.

- Configure all TriMode behaviours
- Customise RGB status LED colours per mode — the module glows the colour you choose when each mode is active
- Simple, intuitive interface
- Compatible with any input device recognised by Windows: Fanatec, Thrustmaster, Logitech, Moza, custom button boxes and more

PERISTALTIC PUMP SYSTEM (FOOD-SAFE)
- Liquid only contacts the tubing, never the pump
- Hygienic and safe for any beverage
- Easy to clean and maintain
- Consistent and precise flow control

Designed for reliability, cleanliness, and long-term use.

HANDS-FREE HYDRATION

- Pump-driven system delivers your beverage directly through a tube
- Compatible with virtually any drink, including fizzy or alcoholic
- No need to reach for bottles or break focus
- Compatible with the optional SRC 4040 Profile Magnetic Mount Plate — attach your tube holder anywhere on your rig

MAGNETIC QUICK-STOW SYSTEM

- Integrated magnetic holder for the mouthpiece
- Snaps securely onto the hidden internal steel plate in the DrinkBox itself
- Can also attach to any magnetic surface on your rig
- Keeps your drink tube exactly where you want it: clean, accessible, and out of the way

FLEXIBLE MOUNTING & INTEGRATION

The SRC-100 DrinkBox features VESA 50 mounting points on the rear and integrates seamlessly with the SRC ModuRig System, like all of our modules.

Not sure which arm to pick? Here's the breakdown:

- No Mounting Arm: use our ModuRig brackets or your own VESA 50 adapter
- SRC Flex Arm – Bottom Mount: full-size arm for maximum reach and flexibility. Mounts via the front-plate ModuRig holes. Recommended if you plan to use the SRC Can Dock
- SRC Flex Arm Mini – Bottom Mount: compact arm, ideal for tighter setups. Mounts via the front-plate ModuRig holes. Recommended if you plan to use the SRC Can Dock
- SRC Flex Arm – VESA Mount: full-size arm using the rear VESA 50 points. NOT compatible with the SRC Can Dock
- SRC Flex Arm Mini – VESA Mount: compact arm using the rear VESA 50 points. NOT compatible with the SRC Can Dock

TIP: Planning to use the SRC Can Dock? Always choose a Bottom Mount option — the can holder attaches to the rear VESA points, which must remain free.

SRC CAN DOCK (optional add-on) Keep your drink can directly on your rig, right behind the DrinkBox. Attaches to the rear of the module and supports a wide range of can sizes:

250ml slim cans
330ml standard cans
500ml cans
Various slim and wider formats

SRC-MAGMOUNT (on our store) A small plate that screws directly onto any 4040 aluminium profile rig. Once mounted, it acts as an anchor point for your magnetic mouthpiece tube holder — keep your tube exactly where you want it, anywhere on your rig.

RACE-INSPIRED POWER CONTROL

Features our signature safety-capped power switch.

Race Car-Inspired Safety: the toggle switch activates by closing the safety cover — a design rooted in motorsport to prevent accidental power-offs during a race.

TUBING & SETUP

The SRC-100 DrinkBox uses a simple and flexible tubing system designed to adapt to any sim racing setup.

Inlet (rear): connects your bottle to the DrinkBox
Outlet (front): routes to the mouthpiece

Includes 2.5 meters of high-quality, food-safe tubing, allowing you to fully customize your layout.

- Cut to your preferred lengths for inlet and outlet
- Easily adapts to any rig configuration or mounting position
- Tubing can be trimmed easily using standard scissors

CARE AND MAINTENANCE

Designed for low-maintenance, hassle-free use.

After use:

Flush the system with clean water for 20–30 seconds
Then run the pump briefly until the tubing is clear, so no liquid remains inside

After sugary drinks:

Always flush thoroughly with clean water to prevent buildup

Regular cleaning:

Occasionally run warm water with a small amount of mild detergent, then flush with clean water

Deep clean (as needed):

Use warm water with a bit of vinegar, then rinse thoroughly

Avoid alcohol-based cleaners, as they may reduce the lifespan of the tubing.

CARBON FIBER LOOK

High-quality 3D printed front and rear panels with a carbon fiber weave texture and finish built directly into the material. Not a sticker, not a wrap, not a decal. Side panels are finished in matching satin black.

WHAT'S INCLUDED (BASE)
- SRC-100 DrinkBox
- Inlet & outlet tubing, 1x 2.5m (cut to size)
- Bite valve mouthpiece
- Magnetic mouthpiece holder on tube
- Power adapter
- USB cable
- Mounting hardware for ModuRig System
- Mounting bolts for VESA points

Free download: SRC-100 DrinkBox Controller software https://github.com/SimRacingCraftsmen/SRC-100-DrinkBox---TriMode