80%ERS Lightsaber Wall Mount LED Wireless Motion Activated Display Savi's Master Replica Wall Mount Legacy Compatible Display Mount - White

Why Do I call them "80%ERS"? These are the same except with a minor bump, scrape, or misprints.
As a conscientious builder, I have time when my printer acts up, or I'm tired and I goof on assembly. I really hate to scrap some of these prints as they are almost perfect, but not perfect enough to my quality standards. However, I really feel bad about scrapping these and adding to the landfill. They are so close to perfect.

Figured I'd give these a second chance, and put them up for sale. These will have blemishes that were made during printing or during assembly but are 100% functional. The blemishes are minimal, and in many cases are hard to notice.

These are offered at a discount and are in limited supply, or until I goof up again.
Everything that comes with the regular models is included. These function exactly as the regular models. It's just a small blemish that bothered me to the point that made me to hold them back.

What's included (*Some parts will be factory seconds with small blemishes):
• Lightsaber Wall Mount
• LED panel (installed in Lightsaber Wall Mount)
• USB-C Charging Cable
• 4 Command Strips

Features:
• Each Wall Mount is made to order out of PLA and can hold 8 lbs.

• Compatible with Master Replica, Savi’s Workshop, Legacy and any similar sized cylindrical lightsaber with a 1” attached blade.
• LED can be set to motion activation, always on, or off and also has brightness and color temperature adjustment.
• Rechargeable
• No screws required - Will not damage walls.


Each Wall Mount is made to order. The wall mount is compatible with 1” diameter blade. Has been tested on Master Replica, Legacy and Savi's Workshop or similar sized lightsabers
The LED settings can be set to always on, off or motion detect. It's rechargeable and in motion detect mode I've had it last about three weeks.

Installation Instructions:
Lightsaber wall mount. No screws required. Fixed to wall with suppled Command Strips
WORKS ON A VARIETY OF SMOOTH SURFACES: Wall hanging strips work on a variety of smooth surfaces, including painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal and tiles
SURFACE PREP: Clean the desired surface with rubbing alcohol to remove grime and dust to allow the no damage wall hangers to bond to the surface; the indoor temperature must be between 50 degrees Fahrenheit and 105 degrees Fahrenheit. Do not use household cleaners.
USAGE TIPS: Wait seven days after painting before using the Command Picture Hangers to allow paint to cure; do not hang over beds or on wallpaper; do not use the wall hanging strips to hang valuable items

1. Separate strips. Press two strips together until they click.
2. Remove one side of liners. Place each pair of strips on the back of the Lightsaber Wall Mount. One towards the top and one towards the bottom half.
3. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec.
4. To ensure adhesive hold, grab bottom corners and peel housing from wall. Do not pull straight off. If the housing lifts off the LED, grab the LED from the bottom or side and pull. Press each strip firmly for 30 seconds.
5. Wait 1 hour to reattach Lightsaber Wall Mount. Line up LED strips on wall and press until each pair of strips click. Then snap on Lightsaber Wall Mount, inserting top over LED first, then the bottom.

Recharging Instructions:
To recharge you can connect a USB-C cable over the top of the wall mount or you will have to remove the Lightsaber Wall Mount housing by pulling the housing from the bottom. It will release. Then, remove the LED panel from the wall by pulling from either the right side or left side. Once it releases you can charge the LED panel. The charge indicator will display green when fully charged. Reverse the removal process to remount the wall mount.

** Orders of 4 or more will have an extended processing time.
** Free Shipping is included on Domestic orders.
** Non-domestic orders are final. Shipping not included.