Life Size Infernal Cape Build Kit V1 Prototype | OSRS RuneScape 3D Printed Wearable Costume Cape | Full Size Gaming Display & Cosplay Prop
Rare find
NowPrice:$615.38
Original Price: $820.51
25% off
Sale ends on November 30
5.0 out of 5
14 ratings
Returns accepted
You can only make an offer when buying a single item
Highlights
Let’s be honest… most of us will never get an Infernal Cape in RuneScape (I was barely scraping by for a Fire Cape myself). But now you can build and wear one in real life - this life-sized Infernal Cape is made from 87 multi-colour 3D printed panels, creating a huge piece of gaming-inspired costume and display art.
Each cape takes over a week to manufacture across approximately 25 separate print runs. Every panel must then be checked, organised and carefully packed, which is reflected in the price of this enormous build kit.
Important - This Is an Unassembled Build Kit:
* Due to its enormous assembled size, the cape cannot be shipped safely as one complete piece
* Supplied as 87 separate 3D printed panels for the buyer to assemble
* Includes black cable ties and a wearable harness
* Assembly usually takes approximately 1-3 hours, depending on experience and working speed
* No glue, painting, drilling or specialist tools are required
* Scissors or side cutters are recommended for trimming the excess cable ties after assembly
* Scissors and cutting tools are not included
* Detailed printed assembly instructions, a full reference image and a numbered panel grid layout are included
Dimensions:
* Approximately 1254.6mm x 1479.8mm
* Approximately 125.5cm x 148cm
* Approximately 49.4 x 58.3 inches
* Exact dimensions may vary slightly depending on how tightly the cable ties are fitted and how much space is left between the panels
What’s Included:
* 87 multi-colour 3D printed Infernal Cape panels
* Black cable ties for joining the panels
* Wearable harness
* Printed assembly instructions
* Full cape reference image
* Numbered panel grid layout
Materials:
* PLA filament
* High-infill 3D printed construction
* Black cable ties
* Wearable harness
* No painting, glue or adhesive - pure filament artistry
Construction:
* Each cape takes over a week to manufacture
* Produced across approximately 25 separate print runs
* Every panel is checked, organised and carefully packed before dispatch
* The fiery red, orange and yellow artwork is printed directly into the panels
* No paint to chip or peel
* The coloured side faces outwards and the black side faces the wearer
* Panels connect using cable ties threaded through matching connector holes
* A small amount of looseness is intentionally left between panels so the finished cape can flex and move
* Made from sturdy, high-infill printed panels - not fabric
* The panels are not completely solid and may still crack or chip if dropped, sharply bent or placed under excessive pressure
Assembly:
* Arrange all 87 panels into the complete cape shape
* Match the artwork and numbered panel positions
* Join neighbouring panels using the supplied cable ties
* Leave a small amount of movement between each panel
* Carefully trim the excess cable tie ends using scissors or side cutters
* Attach the assembled cape to the supplied harness
* Check all connections and anchor points before wearing
* Assembly usually takes approximately 1-3 hours
* Full illustrated instructions are included
Ideal For:
* Players who actually have the Infernal Cape and want to flex it in real life
* Players who will never have the Infernal Cape but would still like to pretend (no judgement, I’m in this camp too)
* Adult cosplay and costume displays
* Gaming rooms, studios and collection displays
* Convention outfits and gaming photoshoots
* Collectors of gaming-inspired 3D art
* Gifts for friends who still log into Gielinor
Safety & Care:
* Decorative costume and display use only - not a toy, protective clothing or safety equipment
* Intended for adult use
* Adult assembly is required
* Contains small parts and cable ties that may present choking, entanglement or strangulation hazards
* Keep all components away from children and pets
* Always wear over clothing and not directly against bare skin
* Printed panels may include firm edges, corners, visible layer lines or small rough areas from the 3D printing process
* Inspect all panels, cable ties, harness straps and connection points before each use
* Do not use if any panel, cable tie, harness connection or anchor point is cracked, sharp, loose or damaged
* Ensure trimmed cable tie ends are smooth and positioned away from the wearer
* Use care when trimming cable ties and always cut away from yourself
* Do not sharply bend the panels, sit on the cape or pull individual panels
* Take care around doors, furniture, bags and other objects that could catch the cape
* Remove the cape immediately if it becomes caught, uncomfortable or restricts movement
* Keep away from open flames, heaters and other heat sources
* PLA may soften or warp at temperatures around 60°C / 140°F
* Avoid prolonged direct sunlight, hot vehicles and damp storage conditions
* Clean gently with a soft, dry cloth or compressed air
* Avoid alcohol, solvents and harsh cleaning chemicals
* Store flat or fully supported to reduce bending or warping
* Indoor display is recommended for best longevity
Shipping:
* Supplied unassembled as a build kit
* Designed and produced entirely in-house in the United Kingdom
* Carefully packed with the panels separated for transport
* International shipping available
* Import duties are prepaid for deliveries to the United States
* Import duties are also prepaid for other destinations wherever a suitable duty pre-paid delivery service is available
* Some destinations may not support duty pre-paid delivery
* Where duties cannot be prepaid, the buyer may be responsible for import duties, GST, customs clearance charges or carrier handling fees on arrival
* Buyers will not be charged twice for duties that have already been prepaid, although customs authorities may reassess a shipment if the declared classification or value is disputed
Limited run fan content created using intellectual property belonging to Jagex Ltd under the terms of Jagex's Fan Content Policy. This is not official RuneScape merchandise, nor affiliated with or endorsed by Jagex.
Manufacturer(s):
Manufacturer: Chuff Forge
Email: chuffforge [!at] outlook.com
Address: Office 13914, 182-184 High Street North, East Ham, London, E6 2JA
Product safety:
Material:This item is made primarily from PLA (Polylactic Acid), a plant-derived thermoplastic commonly used for detailed 3D printing. The printed panels use a high infill setting for added strength, but they are not completely solid and may still crack, chip or break if dropped, bent or placed under excessive pressure.Safety & Care:* Decorative costume and display use only. This item is not a toy, protective clothing or safety equipment.* Intended for careful adult use. Not suitable for children under 14 years.Adult assembly is required.* The kit contains small parts and cable ties that may present choking, entanglement or strangulation hazards. Keep all components away from children and pets.* Always wear the cape over clothing. Do not wear it directly against bare skin.* The printed panels may include firm edges, corners, layer lines or small rough areas as a normal result of the 3D printing process. Handle with care.* Inspect every panel, cable tie, harness strap and connection point before wearing.* Do not use the cape if any panel, cable tie, harness connection or anchor point is cracked, sharp, loose or damaged.* Do not sharply bend the panels, sit on the cape, pull individual panels or allow it to become caught on doors, furniture, bags or other objects.* Ensure the harness is correctly fitted and all connections are secure before use.* Remove the cape immediately if it becomes caught, uncomfortable or restricts movement.* Keep away from open flames, heaters and other heat sources. PLA may be softened or warp at temperatures around 60°C / 140°F.* Avoid prolonged direct sunlight, hot vehicles and damp storage conditions.* Clean gently using a soft, dry cloth or compressed air. Do not use alcohol, solvents or harsh cleaning chemicals.* Store flat or fully supported to reduce the risk of bending or warping.* Indoor display is recommended for the best longevity.
-
Order today to get by Nov 30-Dec 8
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
-
Returns accepted within 14 days
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
-
Cost to ship: $177.78
-
Ships from: United Kingdom
There was a problem calculating your shipping. Please try again.
Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases —
see program terms
Be the first to review this item
Smooth shipping Has a history of shipping on time with tracking.
Speedy replies Has a history of replying to messages quickly.
More from this shop
Visit shop-
OSRS 3D Dragon Med Helmet - Wall and Desk Art | Old School RuneScape Pixel Art 3D Printed | Retro RPG Gaming Gift
Sale Price $61.54
Original Price $82.05
-
OSRS 3D Infernal Cape Keyring | Old School RuneScape 3D Printed Pixel Fire Keychain Collectible | Unique Retro Gamer Gift for Fans
Sale Price $30.76
Original Price $41.01
-
OSRS 3D Gielinor World Map | Old School RuneScape Pixel Art 3D Printed Wall Decor Collectible | Retro RPG Gaming Gift for Fans
Sale Price $51.27
Original Price $68.36
-
OSRS 3D Fire Cape | Old School RuneScape Pixel Fire 3D Printed Collectible Gamer Trophy | Retro RPG Gaming Gift for Fans
Sale Price $15.37
Original Price $20.50
-
Simple Custom EXTRA LARGE Scaletail - Made to Order - READ Description! - Simple One Scale Color, One Yarn Color - JayeCreations
$885.00
-
Simple Custom LARGE Scaletail - Made to Order - READ Description! - Simple One Scale Color, One Yarn Color - JayeCreations
$610.00
-
Yellow Dragon Hand Tufted Custom Rug
Sale Price $271.25
Original Price $775.00
-
OSRS Cape of Accomplishment Skillcape Handmade – RuneScape Cape (Trimmed or Untrimmed)
$399.92
-
Giant Octopus Blanket, Orange Sea Creature Body Cover, Octopus Lover Gift
$650.00
-
Resin Printed Med Helmet OSRS
$450.00
-
Frozen Fossil: T-Rex Skeleton Black Down Jacket - A Prehistoric-Inspired Winter Essential for Dinosaur Enthusiasts
$969.00
-
Reptile Mortal Kombat Cosplay Costume: Armor & Fabric, Handmade
$700.00
-
Women Queen Bee Costume Halloween Bumble Bee Bodysuit Designer Handmade Unique Bee Costume - Sexy Bee Catsuit
$599.00
-
Old School Runescape hand-painted figure now 6in tall! (before 5.5in) - Your own custom character from the game!
$546.33
-
LED Cyberpunk 2077 Sandevistan Spine Jacket / Hooded Cloak – 200+ RGB Patterns, Waterproof Bluetooth Cosplay Rave Festival Techwear
$850.00
-
Custom Made to order~ Monarch Butterfly Felted Hat! Woodland Goddess. OOAK Wearable Art. Merino wool. Orange butterfly hat.
Sale Price $375.00
Original Price $750.00
Shoppers with similar taste loved these
-
Cute Squid Handheld Fan 3D Printed Splatoon Cosplay Prop – Furry Fursuit Mini Fan with DC Charging, Gaming Festival Accessory for Summer
$118.60
-
Digital download
Dinomask Hood pattern / Dinomask Neck pattern - SplitsharkSuits
$14.57
-
Custom Fursuit Paws – Fursuit Hand Paw Commission–Four-Finger Fursuit Paw Gloves-Custom Fursuit Accessories
Sale Price $66.69
Original Price $133.38
-
Custom 5-Finger Fursuit Hand Paws | Color-Block Fingers, Snug Stretch Fur, Soft Fabric Claws
$66.69
-
Realistic version paws fursuit - 5 fingers furry Gloves - commission open
Sale Price $98.00
Original Price $196.00
-
Gothic Hanging Lantern 12" | Dark Home Decor, Witchy Altar Accent (LED Candle Holder)
$69.92
-
TPU Flexible Fursuit Costume Digitigrade leg padding
$57.44
-
Digital download
Slim Halfsleeve Handpaw pattern - SplitsharkSuits
$14.57
-
Gothic Halloween Lantern, Color Changing LED Flame Light, Haunted House Decor, Spooky Table Lamp, Witchy Gift, Dark Home Accent
Sale Price $31.99
Original Price $39.99
-
Helmet, Cosplay/ Fursuit Head, Hat/ Coat Wall Mount. Helmet/ Head Stand.
Sale Price $20.25
Original Price $27.00
-
Dark Witch Costume | Gothic Dress With Hat | Halloween Outfit
Sale Price $191.25
Original Price $255.00
-
Women’s Pirate Costume Full Outfit, Burgundy Velvet Captain Coat, Tricorn Hat and Leather Boots, Steampunk Corset, Renaissance Cosplay Set
$120.00